In industries and all mechanical machines lubricating oil plays a very important role for reducing friction. Lubricating oil worked as life support to all engines and machines. These lubricating oils are made up from environmentally hazardous mineral based oils which create environmental pollution. Due to environmental pollution global warming, acid rain and ozone depletion are increases and causes huge loss of environment and human health. Huge demand of petroleum oils in industries, domestic as well as agricultural sector results depletion of petroleum oil reservoir. Petroleum oil based lubricants are comes in contact with air, water and soil which causes environmental pollution and decreases the quality of air, soil and water. Thus due to all above effects, it is very important to search alternatives for petroleum based lubricant. Vegetable oils are very good alternative to petroleum base oils due to their ecofriendly characteristics. Vegetable oil also shows high viscosity, high lubricity and renewable properties. Increase in acid value with respect to temperature is the limitations of vegetable oils for their use as base oils for lubricants. The present research work is to overcome these limitations by preparing binary blends of vegetable oils. From the above research it is found that oxidative stability of vegetable oils improves by simple blending.
REFERENCES
1.
Nagendramma
, P.
, Kaul
, S.
Development of ecofriendly/biodegradable lubricants an overview
. Renewable Sustainable Energy Review,
16
(1
), 764
–774
(2012
).2.
Quinchia
, LA.
, Delgado
M. A.
, Franco
J. M.
, Spikes
, H. A.
, Gallegos
, C.
Low temperature flow behavior of vege-table oil based lubricants
. Ind. crops products,
37
(1
), 383
–388
(2012
).3.
Salimon
, J.
, Salih
, N.
, Yousif
, E.
Biolubricants-raw materials, chemical modifications and environmental benefits
. European Journal of Lipid Science Technologies,
112
, 519
–530
(2010
).4.
Talkit
, Kailas
M.
, Mahajan
, DT.
, Masand
, VH
. Analytical Study of vegetable oils and their blends as base oil for industrial lubricant
. International Journal of advanced scientific and technical research,
6
(2
), 655
–663
(2012
).5.
Frankel
, E.N.
, and S.W.
Huang
. Improving the Oxidative Stability of Polyunsaturated Vegetables Oils by Blending with High-Oleic Sunflower Oil
, Journal of American Oil Chemical Society,
71
, 255
–259
(1994
).6.
Talkit
, Kailas
M.
, Mahajan
, DT.
, Masand
, VH
. Analytical studies on lubrication properties of different vegetable oils blend at different temperatures
, Archives of Applied Science Research,
7
(5
), 22
–26
(2012
).7.
Ahmadi
, L.
, Marangoni
, A. G.
Functionality and physical properties of interesterified high oleic shortening structured with stearic acid
. Food Chemistry,
117
(4
), 668
–673
(2009
).8.
Farmani
, J.
, Safari
, M.
, Hamedi
, M.
Trans-free fats through interesterification of canola oil/palm olein or fully hydrogenated soybean oil blends
. European Journal of Lipid Science and Technology,
111
(12
), 1212
–1220
(2009
).9.
Modupe
, O.
, Dawodu
, Godwin
O.
, Olutona
and Samuel O.
Obimakinde
. Effect of Temperature on the Chemical Characteristics of Vegetable Oils Consumed in Ibadan, Nigeria
, Pakistan Journal of Nutrition,
14
(10
), 698
–707
(2015
).10.
Ngassapaa
, FN.
, Nyandoroa
, SS.
, Mwaisakab
, TR
.. Effects of Temperature on the Physicochemical Properties of Traditionally Processed Vegetable Oils and Their Blends
, Tanz. J. Sci.
38
(3
), 166
–176
(2012
).11.
Andrikopolous
, NK
, Kalogeropoulos
, N.
, Falirea
, A.
, Barbagianni
, MN
. Performance of Virgin Olive Oil and Vegetable Shortening during Domestic Deepfrying and Pan-frying of Potatoes
, International Journal of Food Science Technologies,
37
, 177
–190
(2002
).12.
Faustine N.
Ngassapa
, Tupeligwe R.
Mwaisaka
and Stephen S.
Nyandoro
. Stability of traditionally processed vegetable oils and their blends under different storage conditions
, Int. J. Biol. Chem. Sci.
10
(5
), 2341
–2350
(2016
).13.
Dawodu
, M.O.
, Olutona
, G.O.
, Obimakinde
, S.O.
Effect of temperature on the chemical characteristics of Vegetable oils consumed in Ibadan, Nigeria
. Pakistan Journal of Nutrition,
14
(10
), 698
–707
(2015
).14.
Rezig
, L.
, Chouaibi
, M.
, Ojeda-Amador
, R.M.
, Gomez-Alonso
, S.
, Salvador
, M.D.
, Fregapane
, G.
, Hamdi
, S.
Cucurbita maxima pumpkin seed oil: From the chemical properties to the different extracting techniques
. Not. Bot. Horti Agrobot. Cluj-Napoca,
46
, 663
–669
(2018
).15.
Farmani
, J.
, Safari
, M.
, & Hamedi
, M.
Trans-free fats through interesterification of canola oil/palm olein or fully hydrogenated soybean oil blends
. European Journal of Lipid Science and Technology,
111
(12
), 1212
–1220
, (2009
).16.
Małgorzata
, Kowalska
, Magdalena
Wózniak
, Anna
Zbikowska
and Mariola
Kozłowska
. Physicochemical Characterization and Evaluation of Emulsions Containing Chemically Modified Fats and Different Hydrocolloids
, Biomolecules,
10
(115
), 1
–17
(2020
).17.
Al-Najjar
B.
and Alsyouf
I.
Enhancing a Company Profit Ability and Competitiveness using Integrated Vibration-Based Maintenance, A Case Study
, European Journal of Operational Research,
157
(3
) 643
–657
(2004
).18.
Fitch
E. C.
, Hong
I. T.
and Xuan
J. L.
Tribological Wear in Hydraulic Systems
, BFPR Journal,
21
, 1154
(1987
).19.
Rao
B.
. Condition Monitoring and the Integrity of Industrial Systems
, In: Davies
A
(Ed.) Handbook of Condition Monitoring: Techniques and Methodology
, pp. 3
–34
(1998
).20.
Dian
, N. L. H. M.
, Sundram
, K.
, Idris
, N. A.
Effect of chemical interesterification on triacylglycerol and solid fat contents of palm stearin, sunflower oil and palm kernel olein blends
. European Journal of Lipid Science and Technology,
109
(2
), 147
–156
(2007
).21.
Suyash Y.
Pawar
, Yashwant R.
Kharde
. Effect of dual reinforced ceramic particles on elevated temperature tribological properties of hybrid aluminium matrix composites
. Advances in Materials and Processing Technologies
, 8
, 1
–17
(2020
).22.
Guotao
Zhang
, Yanguo
Yin
, Ting
Xie
, Dan
Li
, Ming
Xu
, Congmin
Li
.. Tribological properties of the epoxy resin-based solid lubricant coating modified by Kevlar fibers
. Industrial Lubrication and Tribology
70
(9
), 1706
–1713
(2018
).23.
A.V.
Sidashov
, A.T.
Kozakov
, S.I.
Yares'ko
, D.S.
Manturov
, O.V.
Marunevich
. Effect of Nd: YAG Pulsed Laser Radiation on Oxidation and Segregation Processes in the Surface Layers of T8 High Speed Tool Steel: Tribological Consequences
. Applied Surface Science
6
, 150434
(2021
).24.
A.V.
Sidashov
, A.T.
Kozakov
, S.I.
Yares'ko
, N.G.
Kakovkina
, D.S.
Manturov
. Study of the phase composition and tribological properties of carbon tool steels after laser surface hardening by quasi - CW fiber laser
. Surface and Coatings Technology,
385
, 125427
(2020
).25.
Mohammad Asaduzzaman
Chowdhury
, Nayem
Hossain
, Mohammad
Shahin
, Uttam Kumar
Debnath
, Mahbubur
Rahman
, Mohammed M.
Rahman
. Erosion characteristics of stainless steels under different percentage of SiC-Al2O3-Fe2O3 solid particles
. Tribology International,
167
, 107403
(2022
).26.
Zhen
Li
, Yanle
Li
, Jianfeng
Li
, Fangyi
Li
, Haiyang
Lu
, Jiyu
Du
, Xueju
Ran
, Xingyi
Zhang
. Effect of Ni-Cr content on the solid particle erosion behavior of NiCr-Cr3C2 coatings deposited by atmospheric plasma spraying
. Surface and Coatings Technology,
381
, 125144
(2020
).27.
Mehmet
Bagci
. Determination of solid particle erosion with Taguchi optimization approach of hybrid composite systems
. Tribology International
, 94
, 336
–345
(2016
).28.
Pavlo
Rudenko
, Amit
Bandyopadhyay
. Talc as friction reducing additive to lubricating oil
. Applied Surface Science
276
, 383
–389
(2013
).
This content is only available via PDF.
©2023 Authors. Published by AIP Publishing.
2023
Author(s)
You do not currently have access to this content.
