The article analyzes the design documentation and presents the results of measurement work obtained during the inspection of the building of the repair and maintenance unit of the compressor station. According to the results of the survey, defects and damages of the third and fourth categories were identified at the facility, which require their elimination during repair work. It is also established that additional instrumental examination is necessary. For a more accurate diagnosis, it is necessary to determine the strength of concrete structures and brick walls. With the help of instrumental examination of brick walls by the shock pulse method, the values of brick and mortar grades were experimentally obtained. Concrete tests were carried out by a non-destructive strength control method. As a result, the concrete class is determined. The conducted verification calculation showed that the mechanical characteristics of the tested building materials loaded with the full design load are within acceptable values, the strength of the structures is ensured. The conclusion is made about the technical condition of the repair and maintenance unit: this object of research has a limited operational condition. Recommendations for the elimination of damages and defects of materials and structures have been developed in the work.
Skip Nav Destination
Article navigation
9 March 2023
PROCEEDINGS OF THE IV INTERNATIONAL SCIENTIFIC CONFERENCE ON ADVANCED TECHNOLOGIES IN AEROSPACE, MECHANICAL AND AUTOMATION ENGINEERING: (MIST: Aerospace-IV 2021)
10–11 December 2021
Krasnoyarsk, Russian Federation
Research Article|
March 09 2023
Defect and damage control of a specialized compressor station unit
Svetlana Sazonova;
Svetlana Sazonova
a)
1
Department of Technosphere and Fire Safety, Voronezh State Technical University
, 84 October 20th Anniversary Street, Voronezh, 394006, Russia
a)Corresponding author: [email protected]
Search for other works by this author on:
Sergey Nikolenko;
Sergey Nikolenko
b)
1
Department of Technosphere and Fire Safety, Voronezh State Technical University
, 84 October 20th Anniversary Street, Voronezh, 394006, Russia
Search for other works by this author on:
Alla Zvyagintseva;
Alla Zvyagintseva
c)
2
Department of Chemistry and Chemical Technology, Voronezh State Technical University
, 84 October 20th Anniversary Street, Voronezh, 394006, Russia
Search for other works by this author on:
Tatiana Zyazina;
Tatiana Zyazina
d)
3
Department of Life Safety, Voronezh State Pedagogical University
, 86 Lenin Street, Voronezh, 394043, Russia
Search for other works by this author on:
Dmitry Sysoev;
Dmitry Sysoev
e)
4
Department of Innovatics and Construction Physics Named after Professor I. S. Surovtsev, Voronezh State Technical University
, 84 October 20th Anniversary Street, Voronezh, 394006, Russia
Search for other works by this author on:
Svetlana Sumera
Svetlana Sumera
f)
5
Department of Applied Mathematics and Mechanics, Voronezh State Technical University
, 84 October 20th Anniversary Street, Voronezh, 394006, Russia
Search for other works by this author on:
a)Corresponding author: [email protected]
AIP Conf. Proc. 2700, 020009 (2023)
Citation
Svetlana Sazonova, Sergey Nikolenko, Alla Zvyagintseva, Tatiana Zyazina, Dmitry Sysoev, Svetlana Sumera; Defect and damage control of a specialized compressor station unit. AIP Conf. Proc. 9 March 2023; 2700 (1): 020009. https://doi.org/10.1063/5.0125038
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
35
Views
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.
Related Content
Structural condition assessment of a single-storey non-residential building
AIP Conf. Proc. (March 2024)
Test bench for fatigue strength analysis of welded structures
AIP Conf. Proc. (March 2023)
Forecasting of the fire situation at an industrial facility
AIP Conf. Proc. (March 2023)
Control of the formation of defects in brickwork of buildings
AIP Conference Proceedings (June 2022)
Technical monitoring of objects in the zone of new construction influence
AIP Conf. Proc. (March 2024)