The development of modern mobile robots is often connected with advanced reliability, especially in undetermined conditions. One widespread reason for robotic mission failures is robot tip-over. In this paper, a method to avoid tip-over is proposed based on the existing tip-over detection methods in application to a mobile robot with two arms. The method has been validated in Matlab/CoppeliaSim co-simulation environment.
REFERENCES
1.
A. V.
Vasiliev
and I. V.
Shardyko
, “Analysis, detection, reaction and prevention of potential critical situations for light-weight mobile robots
,” in Extreme Robotics
1
, 559
–567
(2019
).2.
Q.
Huang
, S.
Sugano
and I.
Kato
, “Stability control for a mobile manipulator using a potential method
,” in Proceedings of IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS'94)
2
, (IEEE
, 1994
), pp. 839
–846
.3.
J.
Song
and I.
Sharf
, “Time Optimal Motion Planning with ZMP Stability Constraint for Timber Manipulation
,” in 2020 IEEE International Conference on Robotics and Automation (ICRA)
(IEEE
, 2020
), pp. 4934
–4940
.4.
E.G.
Papadopoulos
and D.A.
Rey
, “A new measure of tipover stability margin for mobile manipulators
,” in Proceedings of IEEE International Conference on Robotics and Automation
4
(IEEE
, 1996
), pp. 3111
–3116
.5.
M.
Norouzi
, J.V.
Miro
and G.A.
Dissanayake
, “A statistical approach for uncertain stability analysis of mobile robots
,” in 2013 IEEE International Conference on Robotics and Automation
(IEEE
, 2013
), pp. 191
–196
.6.
H.
Zhang
and A.
Song
, Advanced Robotics
28
(23
), 1571
–1585
(2014
).7.
I.R.
Nanyageev
, I. V.
Shardyko
and I.Yu.
Dalyaev
, “Motion specification algorithms for both platform and arms of a mobile robot for planetary research
,” in IOP Conference Series: Materials Science and Engineering
747
(1
) (IOP Publishing
, 2020
).8.
A.V.
Vasiliev
and I.Yu.
Dalyaev
, Machines
9
(1
), 8
(2021
).9.
M.W.
Spong
and M.
Vidyasagar
, Robot dynamics and control
(John Wiley & Sons
, 2008
), pp. 125
–126
.
This content is only available via PDF.
© 2023 Author(s).
2023
Author(s)
You do not currently have access to this content.