In the oil and gas industry, the moving of materials and equipment is often carried out using forklift. Thus, a safe and reliable forklift is required to guarantee the moving processes to proceed safely and smoothly. To this end, one of the means to ensure that the lifting equipment could perform well is by conducting preventive maintenance. Preventive maintenance, which is another form of controlling risks related to equipment, consists of several methods such as: lubrication, cleaning and inspection. The inspection is a comprehensive preventive maintenance during which not the evaluation is conducted not only on the function of equipment, but also on the safety of the operators who utilize the equipment and the surrounding environment where the equipment is operated. In this study, the preventive maintenance was performed on forklifts by following the Lifting and Transporting Instruments Inspection based on the Minister of Manpower Regulation No. 8 2020 on Occupational Safety and Health for Lifting and Transporting Instruments. The methods carried out were visual inspection, technical measurement, non-destructive testing, function testing and load lifting testing. These procedures resulting in several recommendations, namely the necessity to repair the safety equipment section (the horn), the urgent replacement of brake lights and the required action on the leak in hydraulic seals.
Skip Nav Destination
Article navigation
25 September 2023
THE 4TH INTERNATIONAL CONFERENCE ON APPLIED ENGINEERING (ICAE 2021)
13 October 2021
Batam, Indonesia
Research Article|
September 25 2023
Analysis of preventive maintenance on forklifts with the lifting and transporting instruments inspection method
Budi Baharudin;
Budi Baharudin
a)
1
Department of Mechanical Engineering, Batam State Polytechnic
, Jl. Ahmad Yani, Batam, Riau Islands, Indonesia
29411
Search for other works by this author on:
Hanifah Widiastuti;
Hanifah Widiastuti
b)
1
Department of Mechanical Engineering, Batam State Polytechnic
, Jl. Ahmad Yani, Batam, Riau Islands, Indonesia
29411b)Corresponding author: [email protected]
Search for other works by this author on:
Nur Fitria Pujo Loksonowati;
Nur Fitria Pujo Loksonowati
1
Department of Mechanical Engineering, Batam State Polytechnic
, Jl. Ahmad Yani, Batam, Riau Islands, Indonesia
29411
Search for other works by this author on:
Panji A. Prajasutra;
Panji A. Prajasutra
1
Department of Mechanical Engineering, Batam State Polytechnic
, Jl. Ahmad Yani, Batam, Riau Islands, Indonesia
29411
Search for other works by this author on:
Athifah Az-Zahra Effendi
Athifah Az-Zahra Effendi
c)
1
Department of Mechanical Engineering, Batam State Polytechnic
, Jl. Ahmad Yani, Batam, Riau Islands, Indonesia
29411
Search for other works by this author on:
AIP Conf. Proc. 2665, 040007 (2023)
Citation
Budi Baharudin, Hanifah Widiastuti, Nur Fitria Pujo Loksonowati, Panji A. Prajasutra, Athifah Az-Zahra Effendi; Analysis of preventive maintenance on forklifts with the lifting and transporting instruments inspection method. AIP Conf. Proc. 25 September 2023; 2665 (1): 040007. https://doi.org/10.1063/5.0126280
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
23
Views
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Related Content
Ergonomic risk analysis of warehouse workers in the textile industry using rapid upper limb body assessment (RULA) and rapid entire body assessment (REBA)
AIP Conf. Proc. (February 2025)
Construction of multipurpose wheelbarrow in facilitating civil work
AIP Conference Proceedings (November 2022)
Hazard identification, risk assessment, and risk control in an alcohol warehouse: A case study
AIP Conf. Proc. (January 2025)
Development of an agile model using total productive maintenance to enhance industrial sustainability in industry 4.0
AIP Conf. Proc. (February 2023)