The purpose of this research is to identify waste in the production process of making one of the products in the XYZ garment company. Waste in this study refers to the lean manufacturing method. The methods used in this study are VSM (Value Stream Mapping), WAM (Waste Assessment Model), QFM (Quality Filter Mapping), and FMEA (Failure Mode Effect Analysis) method. The results of this study are the highest types of waste that affect other wastage is a defect. After checking all the production processes, the sewing process is a process that causes a lot of mistakes where the highest cause is the thread is cut off when the sewing takes place. For that, we need further research to solve it.
REFERENCES
1.
T.
Ohno
and N.
Bodek
, Toyota production system: beyond large-scale production (Productivity press
, New York
, 2019
).2.
J. P.
Womack
and D. T.
Jones
, Journal of the Operational Research Society
48
, 1148
–1148
(1997
).3.
A. P.
Lacerda
, A. R.
Xambre
, and H. M.
Alvelos
, Int. J. Prod. Res.
54
, 1708
–1720
(2016
).4.
E.
Amrina
and A. A. A.
Lubis
, “Minimizing waste using lean manufacturing: A case in cement production
,” In 2017 4th International Conference on Industrial Engineering and Applications (ICIEA)
(IEEE
, 2017
), pp. 71
–75
.5.
6.
7.
A.
Fercoq
, S.
Lamouri
, and V.
Carbone
, J. Clean. Prod.
137
, 567
–578
(2016
).8.
S.
Nallusamy
, Int. J. Eng. Res. Africa
21
, 231
–237
(2016
).9.
D. T.
Matt
and E.
Rauch
, Procedia CIRP
12
, 420
–425
(2013
).10.
S. K.
Dewi
, “Analisis Defect Pada Proses Produksi Dengan
,” in Seminar Nasional Teknologi dan Rekayasa
(2018
), pp. 100
–105
.11.
I.
Siregar
, A. A.
Nasution
, U.
Andayani
, R. M.
Sari
, K.
Syahputri
, and Anizar IOP Conference Series: Materials Science and Engineering
308
, 012004
(2018
).12.
13.
N. H.
Zakaria
, N. M. Z. N.
Mohamed
, M. F. F. A.
Rahid
, and A. N. M.
Rose
, MATEC Web of Conferences
90
, 01048
(2016
).14.
15.
16.
17.
H.
Henny
and H. R.
Budiman
, IOP Conf. Ser. Mater. Sci. Eng.
407
, 012077
(2018
).18.
W.
Adrianto
and M.
Kholil
, J. Optimasi Sist. Ind.
14
, 299
(2016
).19.
T.
Ristyowati
, A.
Muhsin
, and P. P.
Nurani
, Opsi
10
, 85
(2017
).20.
I. A.
Rawabdeh
, Int. J. Oper. Prod. Manag.
25
, 800
–822
(2005
).21.
T.
Ohno
, Japanese Econ. Stud.
10
, 83
–101
(1982
).
This content is only available via PDF.
©2023 Authors. Published by AIP Publishing.
2023
Author(s)
You do not currently have access to this content.
