This study aims to determine the characteristics of Marshall in AC-WC concrete asphalt mixture with the addition of a variation of 3%, latex to the total adhesive. The stages of implementation include preparation of tools and materials, such as mixing aggregate, 60/70 penetration asphalt and natural rubber (latex). Based on research conducted, obtained the characteristics of a mixture of AC-WC with a variation of asphalt content of 4.5%; 5%; 5.5%; 6%; 6.5%. Stability values are obtained as follows 855.04 kg; 894.12 kg; 875.24 kg; flow: 3.17 mm; 3.22 mm; 3.29 mm, Marshall Quotient: 270.40 kg / mm; 277.60 kg / mm; 266.60 kg / mm, VIM: 6.43%; 4.58%; 2.81%, VMA: 14.04%; 14.54%; 15.15%, and VFA: 54.25%; 68.58%; 81.40%. The addition of natural rubber to the AC-WC mixture showed better Marshall stability values, indicating that asphalt added with latex caused the asphalt to become stronger. High flow values, marshall quotient, lower VIM values, better VMA values and higher VFA values.
Skip Nav Destination
Article navigation
2 August 2023
4TH INTERNATIONAL CONFERENCE ON SUSTAINABLE INFRASTRUCTURE: Research and Innovation in Sustainable Infrastructures During the Covid-19 Pandemic
5 October 2021
Yogyakarta, Indonesia
Research Article|
August 02 2023
Analysis characteristics of Marshall with the addition of natural rubber (latex) in AC-WC concrete asphalt mixture
Rahmat Djamaluddin;
Rahmat Djamaluddin
a)
Department of Civil Engineering, Teuku Umar University
, West Aceh, Indonesia
a)Corresponding author: [email protected]
Search for other works by this author on:
Irfan Irfan;
Irfan Irfan
b)
Department of Civil Engineering, Teuku Umar University
, West Aceh, Indonesia
Search for other works by this author on:
Andrisman Satria;
Andrisman Satria
c)
Department of Civil Engineering, Teuku Umar University
, West Aceh, Indonesia
Search for other works by this author on:
Firzan Firzan
Firzan Firzan
d)
Department of Civil Engineering, Teuku Umar University
, West Aceh, Indonesia
Search for other works by this author on:
a)Corresponding author: [email protected]
AIP Conf. Proc. 2629, 050008 (2023)
Citation
Rahmat Djamaluddin, Irfan Irfan, Andrisman Satria, Firzan Firzan; Analysis characteristics of Marshall with the addition of natural rubber (latex) in AC-WC concrete asphalt mixture. AIP Conf. Proc. 2 August 2023; 2629 (1): 050008. https://doi.org/10.1063/5.0129622
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
23
Views
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Related Content
Study of marshall characteristic on asphalt mixture with addition of periwinkle shell as a substitute of filler
AIP Conf. Proc. (August 2023)
Performance evaluation of asphalt concrete wearing coarse with a mixture of coal fly ash and brick powder as filler
AIP Conf. Proc. (August 2023)
Marshall parameters analysis of asphalt concrete wearing course using addition of polyvinyl chloride waste
AIP Conf. Proc. (June 2024)
An experimental study on effect of mixing procedure on polypropylene modified bituminous mix
AIP Conference Proceedings (June 2022)
Influence of fly-ash based geopolymer additives on the preliminary properties of cold asphalt mix
AIP Conf. Proc. (October 2024)