In this paper, a dual-band printed rectenna of compact size (38×24) mm2 has been designed and analyzed to work at GSM frequency of 900 MHz and WiFi frequency of 2.4 GHz for wireless power transmission. The purpose of this design is to harvest energy at two different frequencies to increase the probability of receiving power from ambient field. The antenna part of this rectenna is printed on FR4 substrate and has the shape of meander line with two arms for double-band operation. The rectifier part of this rectenna consisted of impedance matching network, AC-to-DC conversion circuit and a DC filter. The design and simulation results of this rectenna have been done with the help of CST 2019 and ADS 2018 software packages. At a received input power of -30 dBm and a load resistance of 1900 Ω, the maximum conversion efficiencies obtained by this rectenna at frequencies of 900 MHz and 2.4 GHz are found as 23% and 42% respectively.

1.
K.
Wu
,
D.
Choudhury
and
H.
Matsumoto
, “
Wireless Power Transmission, Technology, and Applications
,”
IEEE Proceedings
, vol.
101
, no.
6
, pp.
1271
1275
, Jun. 2013.
2.
Y.
Suh
 et al, “
A High-Efficiency Dual-Frequency Rectenna for 2.45-and 5.8– GHz Wireless Power Transmission
”,
IEEE Transactions on Microwave Theory and Techniques
, vol.
50
, no.
7
, pp.
1784
1789
,
2002
.
3.
D.
Chuc
 et al., “
Design, Simulation and Fabrication of Rectenna Circuit at S-Band for Microwave of Power Transmission
”,
VNU. Mathematics – physics’
, vol.
30
, no.
3
, pp.
24
30
,
2014
.
4.
CST: Computer Simulation Technology Based on FIT Method
,
2019
.
5.
ADS: Advanced Design System software
,
2018
.
6.
P.
Prabhu
,
C.
Poongodi
,
P.
Sarwesh
, and
Dr. A.
Shanmugam
, “
Design A Low Profile Printed Monopole Antenna for RFID Applications
,”
International Journal of Innovative Research in Science, Engineering and Technology
, Vol.
2
, No.
2
,
2013
.
7.
M.
Pelosi
,
M. B.
Knudsen
, and
G. F.
Pedersen
, "
Multiple antenna systems with inherently decoupled radiators
,"
IEEE Transactions on Antennas and Propagation
, vol.
60
, pp.
503
515
,
2012
.
8.
M.
Ali
 et al., “
Novel method for planar microstrip antenna matching Impedance
”,
Journal of Telecommunications
, May
2010
.
9.
D.
Ho
 et al., “
A Novel Dual - Band Rectenna for Ambient RF Energy Harvesting at GSM - 900 MHz and 1800 MHz
”,
ASTES . Advances science, technology and engineering journal
, vol.
2
, no.
3
, pp.
612
616
,
2017
.
10.
L.
Fadel
 et al.,“
A concurrent 915/2440 MHz RF Energy Harvester
”,
International journal of microwave and wireless technologies
, pp.
1
99
,
2017
.
11.
G. M.
Ghiglino
, “
Ultra - Wide band (UWB) Rectenna Design for Electromagnetic Energy Harvesting
”, a thesis submitted in partial fulfillment for the degree of engineer.
2010
.
12.
S.
Shen
 et al., “
A Dual - Port Triple - Band L-Probe Microstrip Patch Rectenna for Ambient RF Energy Harvesting
”,
IEEE antennas and propagation letters
, vol.
16
, pp.
3071
3074
.
2017
.
13.
A.
Amor
 et al., “
RF Energy Harvesting System Based on an Archimedean Spiral Antenna for Low-Power Sensor Application
”,
Sensors, MDPI Publisher
,
19
(
6
),
1318
2019
.
14.
Agarwal
,
P.
,
Idrees
,
S. M.
, &
Obaid
,
A. J.
(
2021
).
Blockchain and IoT Technology in Transformation of Education Sector
.
International Journal of Online and Biomedical Engineering (iJOE)
,
17
(
12
), pp.
4
18
. .
This content is only available via PDF.
You do not currently have access to this content.