Aluminum compound materials or just blends are mixes of materials. They are comprised of joining at least two materials so that the subsequent materials have certain plan features on further developed attributes. The Aluminum compound mixture materials comprise of maximum explicit strength, high explicit solidness, additional warm steadiness, more than erosion and wear obstruction, high exhaustion life.

Ordinary materials like Steel, Brass, and Aluminum and so forth will come up short with no sign. Breaks inception, spread will happens inside a limited capacity to focus. Presently a day to defeat this issue, customary materials are supplanted by Aluminum combination materials. Aluminum amalgam elements found to the better option with its exceptional limit of planning the substances to give essentialfeatures. In this undertaking elasticity tests have been directed by changing mass part of SiC and Gr (5%, 10%, and 15%) with Aluminum. to accomplish most extreme rigidity. Different mechanical conduct of Aluminum Silicon Carbide composites are additionally contemplated.

1.
Barmouz
,
M
,
Asadi
P.
,
Besharati Givi
,
M.K
, and
Taherishargh
,
M.
,
2011
, “
Investigation Of Mechanical Properties Of Cu/Sic Composite Fabricated By FSP: Effect Of Sic Particles’ Size And Volume Fraction
”,
Material Science And Engineering A
, No.
528
, Pp.
1740
1749
.
2.
Devinder
Yadav
, and
Ranjit
Bauri
,
2010
, “
Nickel Particle Embedded Aluminium Matrix Composite With High Ductility
”,
Material Letters
,No.
64
, Pp.
664
667
.
3.
Lloyds
,
D.J.
,
1993
, “
Particle Reinforced Aluminium And Magnesium Matrix Composites
”,
International Materials Reviews
,No.
1
, Pp.
1
23
.
4.
S. Sathees
Kumar
, and
Ganesan
Kanagaraj
. “
Effect of graphite and silicon carbide fillers on mechanical properties of N6 polymer composites
.”
Journal of Polymer Engineering
37
.
6
(
2017
):
547
557
.
5.
S. Sathees
Kumar
, and
G.
Kanagaraj
. “
Investigation on mechanical and tribological behaviors of N6 and graphite-reinforced N6 polymer composites
.”
Arabian Journal for Science and Engineering
41
.
11
(
2016
):
4347
4357
.
6.
S. Sathees
Kumar
, and
G.
Kanagaraj
. “
Experimental investigation on tribological behaviours of N6, N6-reinforced Al2O3 and N6-reinforced graphite polymer composites
.”
Bulletin of Materials Science
39
.
6
(
2016
):
1467
1481
.
7.
S. Sathees
Kumar
, and
G.
Kanagaraj
. “
Evaluation of mechanical properties and characterization of silicon carbide– reinforced polyamide 6 polymer composites and their engineering applications
.”
International Journal of Polymer Analysis and Characterization
21
.
5
(
2016
):
378
386
.
8.
S. Sathees
Kumar
, and
G.
Kanagaraj
. “
Investigation of characterization and mechanical performances of Al2O3 and SiC reinforced N6 hybrid composites
.”
Journal of Inorganic and Organometallic Polymers and Materials
26
.
4
(
2016
):
788
798
.
9.
S.
Sudhagar
and
S. Sathees
Kumar
, “
Determination of wear, friction behaviour and characterisation of carbon fiber reinforced epoxy composites for transport applications
”,
Materials Research
,
23
(
6
),
2020
Epub Jan 29, 2021.
10.
S. Sathees
Kumar
and
B. Sridhar
Babu
, “Experimental evaluation on wear and coefficient of frictional performance of Zirconium Oxide nano particles reinforced Polymer composites for gear applications”
Nanomaterials and Nanocomposites Characterization, Processing, and Applications
,
CRC Press
- ISBN: 978-1-003-16094-6, Ebook ISBN: 9781003160946, pp.
122
-
138
, 2021.
11.
CH Nithin
Chakravarthy
,
S. Sathees
Kumar
,
R.
Muthalagu
,
Muthukumaran
Ramasamy
, “
Experimental investigation and optimization on surface parameters of ZrO2 nano particles reinforced Al-7050 metal matrix composites for aeronautical applications
”,
International Conference on Newer Trends and Innovations in Mechanical Engineering (icontime - 2020), Materials Today Proceedings
,
37
, pp.
2406
2414
(
2021
).
12.
S Sathees
Kumar
,
CH. Nithin
Chakravarthy
,
M
Nithya
, “
Processing and mechanical performances of ZrO2 reinforced thermoplastic Nylon 6 composites for gear applications
”,
International Conference on Newer Trends and Innovations in Mechanical Engineering (icontime - 2020), Materials Today Proceedings
,
37
, pp.
3038
3044
(
2021
).
13.
S. Sathees
Kumar
,
Vishnu Vardhan
,
T.
,
Sridhar Babu
,
B.
,
Ch. Nithin
Chakravarthy
,
Prabhakar
,
N.
,
Venkateswar Rao
,
K.
and
Tirupathi
,
K.
Dataset on tribological, characterization and thermal properties of Silicon carbide reinforced polyamide composites for industrial applications
.”
Data in Brief
, pp.
105662
(
2020
).
14.
Velusamy Mugesh
Raja
, and
S. Sathees
Kumar
, “
Determination of Static and Fatigue Characteristics of Carbon Fiber Reinforced Polyester Composites for Automobile Applications
.”
Materials Research
22
,
6
(
2019
).
15.
S. Sathees
Kumar
,
Ch. Nithin
Chakravarthy
and
R.
Muthalagu
, “Experimental evaluation on tribological behaviour of TiO2 reinforced polyamide composites validated by Taguchi and machine Learning methods”,
Computational Technologies in Materials Science
,
CRC Press
– ISBN – 9781003121954, pp.
25
,
2021
.
16.
S Sathees
Kumar
,
B Sridhar
Babu
,
CH Nithin
Chakravarthy
,
R
Muthalagu
, “
Mechanical characterization and thermal behaviors of tungsten carbide reinforced thermoplastic composites
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020), Materials Today Proceedings
,
46
, pp.
399
404
(
2021
).
17.
Dolata-Grosz
,
A.
, and
Wieczorek
,
J.
2007
, “
Tribological Properties Of Hybrid Composites Containing Two Carbide Phases
”,
Archives Of Material Science And Engineering
, No.
28
, Pp.
149
155
.
18.
R.
Srinivasu
,
A. Sambasiva
Rao
,
G. Madhusudhan
Reddy
,
K. Srinivasa
Rao
,
2014
, “
Friction Stir Surfacing Of Cast A356 Aluminiumsilicon Alloy With Boron Carbide And Molybdenum Disulphide Powders
”,
Defence Technology
,No.
11
, Pp.
140
146
.
19.
Dunia Abdul
Saheb
,
2011
, “
Aluminum Silicon Carbide and AluminumGraphiteParticulateComposites
”,
ARPNJournalOf Engineering And Applied Sciences
,No.
6
, Pp.
41
46
.
20.
Muhsin J.
Jweeg
,
Ayad M.
Takhakh
,
Nawzad K.
Kareem
,
2015
, “
Comparison Between Friction Stir Welding (Fsw) And Friction Stir Processing (Fsp) Of Aa5086 Aluminium Alloy
”,
International Journal Of Technical Research And Applications
, No.
3
, Pp.
204
210
.
21.
A.
Włodarczyk-Fligier
,
L.A.
Dobrzański
,
M.
Kremzer
,
M.
Adamiak
,
2008
, “
Manufacturing Of Aluminium Matrix Composite Materials Reinforced By Al2O3 Particles
AMME
,No.
27
, PP.
99
102
.
22.
Lim
,
D.K.
,
Shibayanagi
,
T.
and
Gerich
,
A.P.
(
2009
) “
Synthesis Of Multi-Walled CNT Reinforced Aluminium Alloy Composite Via Friction Stir Processing
Materials Science And Engineering A
,No.
507
, PP.
194
1
.
23.
S. Sathees
Kumar
and
V. Mugesh
Raja
, “
Processing and determination of mechanical Properties of prosopis juliflora bark, banana and coconut fiber reinforced hybrid bio composites for an engineering field
”,
Composites Science and technology
,
208
(
2021
)
24.
R.
Muthalagu
,
V.
Srinivasan
,
S. Sathees
Kumar
and
V. Murali
Krishna
, “
Extraction and effects of mechanical characterization and thermal attributes of Jute, Prosopis juliflora bark and Kenaf fibers reinforced bio composites used for engineering applications
”,
Fibers and Polymers
,
2021
.
25.
V. Mugesh
Raja
, and
S. Sathees
Kumar
, “Exploration of mechanical attributes, thermal behaviors and atomic force analysis of alkali treated hybrid polyester composites for an engineering application,
Fibers and Polymers
,
2021
. (SCI -
Springer
) (IF – 2.105)
26.
B. Sridhar
Babu
and
Kaushik
Kumar
,
Temperature Dependence of Indentation Behavior of Ti-6Al-4V Alloy for Bio Medical Applications Biointerface Research in Applied Chemistry
, ISSN: 2069-5837
27.
S. Sathees
Kumar
,
V. Mugesh
Raja
,
CH. Nithin
Chakravarthy
, and
R.
Muthalagu
, “
Determination of mechanical Properties and characterization of alkali treated sugarcane bagasse, pine apple leaf and sisal fibers reinforced hybrid polyester composites for various applications
”.
Fibers and Polymers
,
1
9
,
2021
28.
A. K. Arun
Raja
,
K. Arun Vasantha
Geethan
,
S. Sathees
Kumar
, and
P. Sabarish
Kumar
, “
Influence of Mechanical Attributes, Water Absorption, Heat Deflection Features and Characterization of Natural Fibers Reinforced Epoxy Hybrid Composites for an Engineering Application
Fibers and Polymers
, .
29.
B Sridhar
Babu
,
A
Kumaraswamy
,
B
Anjaneya Prasad
Effect of Indentation Size and Strain Rate on Nanomechanical Behavior of Ti-6Al-4V Alloy
Transactions of Indian institute of metals Springer
, Vol No.
67
, Issue No.
5
,
2014
30.
S.
Sudhagar
and
S. Sathees
Kumar
, “
Determination of wear, friction behaviour and characterisation of carbon fiber reinforced epoxy composites for transport applications
”,
Materials Research
,
23
(
6
),
2020
Epub Jan 29, 2021.
31.
S. Sathees
Kumar
, and
V.
Vignesh
, “
Effect of titanium oxide, alumina oxide and silicon carbide on mechanical properties and thermal properties of reinforced nylon composites for industrial applications
”,
International Journal of Computer Aided Engineering and Technology, Inder science publishers
, DOI: .
32.
B Sridhar
Babu
,
A
Kumaraswamy
,
B
Anjaneya
Prasad Investigation of Elasto-Plastic Deformation Behavior of Haynes242 Alloy Subjected to Nanoscale Loads through Indentation Experiments
Transactions of Indian institute of metals Springer
, May
2015
.
33.
S. Sathees
Kumar
, “
Effect of natural fiber loading on mechanical properties and thermal characteristics of hybrid polyester composites for industrial and construction Fields
”,
Fibers and Polymers
,
21
,
7
, pp.
1508
1514
(
2020
).
34.
S Sathees
Kumar
,
B Sridhar
Babu
,
Ch Nithin
Chankravarthy
,
N
Prabhakar
, “
Review on natural fiber polymer composites
”.
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020), Materials Today Proceedings
,
46
, pp.
777
782
(
2021
).
35.
Sridhar Babu
B.
,
Kumaraswamy
A.
,
Anjaneya Prasad
B.
Numerical analysis of effect of friction on mechanical properties of Ti-6Al-4VAlloy through Nanoindentation
.’
Procedia Engineering (Elsevier)
64
(
2013
)
1048
1055
36.
S. Sathees
Kumar
,
B. Sridhar
Babu
, “
Determination of mechanical attributes of natural fibers reinforced polyester bio composites
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020), Materials Today Proceedings
,
46
, pp.
767
771
(
2021
).
37.
SB
Viswanath
,
S Sathees
Kumar
,
D
Sudarsan
,
R
Muthalagu
, “
Mechanical attributes of coir fibre, rice husk and egg shell reinforced hybrid polyester composites
”,
International Conference on Manufacturing, Material Science and Engineering, Materials Today Proceedings
,
46
, pp.
874
877
(
2021
).
38.
B. Sridhar
Babu
and
M.
Srinivas
,
A Critical Review on Recent Research Methodologies in additive Manufacturing
,
Materials today (Elsevier)
4
,
8
(
2017
):
9049
9059
.
39.
CH Nithin
Chakravarthy
,
S Sathees
Kumar
,
R
Muthalagu
,
Muthukumaran
Ramasamy
, “
Experimental investigation and optimization on surface parameters of ZrO2 nano particles reinforced Al-7050 metal matrix composites for aeronautical applications
”,
International Conference on Newer Trends and Innovations in Mechanical Engineering (icontime - 2020), Materials Today Proceedings
,
37
, pp.
2406
2414
(
2021
).
40.
M Saravana
Kumar
,
S Sathees
Kumar
,
B Sridhar
Babu
, and
CH Nithin
Chakravarthy
. “
Influence of fiber loading on mechanical characterization of pineapple leaf and kenaf fibers reinforced polyester composites
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020), Materials Today Proceedings
,
46
, pp.
439
444
(
2021
).
41.
Sridhar Babu
B.
,
Kumaraswamy
A.
Novel method of evaluating flow curve for SS304 form low cost indentation experiments ARPN journal of engineering and Applied sciences
,
5
,
12
,
2010
, pp.
38
42
42.
S Sathees
Kumar
,
R
Muthalagu
, and
Ch Nithin
Chakravarthy
, “
Effects of fiber loading on mechanical characterization of pineapple leaf and sisal fibers reinforced polyester composites for various applications
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020), Materials Today Proceedings
,
46
, pp.
546
553
(
2021
).
43.
R Muthalagu
,
J
Murugesan
,
S
Sathees
Kumar
, and
B. Sridhar
Babu
, “
Tensile attributes and material analysis of kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020), Materials Today Proceedings
,
46
, pp.
433
438
(
2021
).
44.
B. Sridhar
Babu
,
Pawar Deepak
Dinkarrao
. ‘
Computational Fluid Dynamics and Experimental Analysis for Optimum Geometry of Vortex Tube
.’
International Journal of Innovative Research in Science, Engineering and Technology
, Volume
3
, Issue
8
,
2014
45.
S Sudhagar
,
V
Mugesh
Raja
,
S. Sathees
Kumar
, and
A. Jonathan
Samuel
, “
The wear behavior and service life of Madar and Bauhinia Racemosa reinforced polyester hybrid composites for gear applications
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2019), Materials Today Proceedings
,
19
, pp.
589
593
(
2021
).
This content is only available via PDF.
You do not currently have access to this content.