Manufacturers may benefit from a variety of features using lightweight structures, which are particular tempting for construction projects. Light weight, endurance in difficult conditions, and high tensile strength are really just few other reasons that polymer composites have become more common recently in construction projects. Throughout the form of fiber reinforced layers, composite materials, or sheets, composites are also widely utilized to reinforce ailing existing buildings. Polymer composites were also deemed novel compared to conventional material like glass and metal, although its effectiveness in structural materials. As a result, the main challenge has always been in the code early stages of development. Methods for evaluating the mechanical characteristics of composite materials, among the most significant parts of engineering, are suggested to be explored in this work. The purpose is to give developers with high-confidence values that will effectively contribute to the development of the any design methods. This paper examines the optimal mechanical characteristics of hybrid composites. In compared to carbon fiber reinforced composites, glass fiber reinforced polymer composites have a low rigidity and a high elongation.

1.
S
.
Sathees Kumar
and
V
.
Mugesh Raja
,“
Processing and determination of mechanical Properties of prosopis juliflora bark, banana and coconut fiber reinforced hybrid bio composites for an engineering field
”,
Composites Science and technology
,
208
(
2021
)
2.
R.
Muthalagu
,
V.
Srinivasan
,
S
.
Sathees Kumar
and
V. Murali
Krishna
, “
Extraction and effects of mechanical characterization and thermal attributes of Jute, Prosopis juliflora bark and Kenaf fibers reinforced bio composites used for engineering applications
”,
Fibers and Polymers
,
2021
.
3.
V
.
Mugesh Raja
, and
S
.
Sathees Kumar
, “
Exploration of mechanical attributes, thermal behaviors and atomic force analysis of alkali treated hybrid polyester composites for an engineering application
,
Fibers and Polymers
,
1
,
8
2021
.
4.
S
.
Sathees Kumar
,
V
.
Mugesh Raja
,
CH. Nithin
Chakravarthy
, and
R.
Muthalagu
, “
Determination of mechanical Properties and characterization of alkali treated sugarcane bagasse, pine apple leaf and sisal fibers reinforced hybrid polyester composites for various applications
”.
Fibers and Polymers
,
1
9
,
2021
5.
A. K
.
Arun Raja
,
K
.
Arun Vasantha Geethan
,
S
.
Sathees Kumar
, and
P
.
Sabarish Kumar
, “
Influence of Mechanical Attributes, Water Absorption, Heat Deflection Features and Characterization of Natural Fibers Reinforced Epoxy Hybrid Composites for an Engineering Application
Fibers and Polymers
, .
6.
S.
Sudhagar
and
S
.
Sathees Kumar
, “
Determination of wear, friction behaviour and characterisation of carbon fiber reinforced epoxy composites for transport applications
”,
Materials Research
,
23
(
6
), 2020 Epub Jan 29,
2021
.
7.
S
.
Sathees Kumar
, and
V.
Vignesh
, “Effect of titanium oxide, alumina oxide and silicon carbide on mechanical properties and thermal properties of reinforced nylon composites for industrial applications”,
International Journal of Computer Aided Engineering and Technology
,
Inder science publishers
, DOI: .
8.
S
.
Sathees Kumar
, “
Effect of natural fiber loading on mechanical properties and thermal characteristics of hybrid polyester composites for industrial and construction Fields
”,
Fibers and Polymers
,
21
,
7
, pp.
1508
1514
(
2020
).
9.
B
.
Sridhar Babu
and
Kaushik
Kumar
,
Temperature Dependence of Indentation Behavior of Ti-6Al-4V Alloy for Bio Medical Applications Biointerface Research in Applied Chemistry
, ISSN: 2069-5837
10.
B
.
Sridhar Babu
,
A.
Kumaraswamy
,
B
.
Anjaneya Prasad
‘Effect of Indentation Size and Strain Rate on Nanomechanical Behavior of Ti-6Al-4V Alloy’
Transactions of Indian institute of metals
Springer
, Vol No.
67
, Issue No.
5
, October
2014
11.
S
.
Sathees Kumar
,
B
.
Sridhar Babu
,
Ch. Nithin
Chakravarthy
,
N.
Prabhakar
, “
Review on natural fiber polymer composites
”.
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020)
, Materials Today Proceedings,
46
, pp.
777
782
(
2021
).
12.
S
.
Sathees Kumar
,
B
.
Sridhar Babu
, “
Determination of mechanical attributes of natural fibers reinforced polyester bio composites
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020)
, Materials Today Proceedings,
46
, pp.
767
771
(
2021
).
13.
S.B.
Viswanath
,
S
.
Sathees Kumar
,
D.
Sudarsan
,
R.
Muthalagu
, “
Mechanical attributes of coir fibre, rice husk and egg shell reinforced hybrid polyester composites
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020)
, Materials Today Proceedings,
46
, pp.
874
877
(
2021
).
14.
C.H. Nithin
Chakravarthy
,
S
.
Sathees Kumar
,
R.
Muthalagu
,
Muthukumaran
Ramasamy
, “
Experimental investigation and optimization on surface parameters of ZrO2 nano particles reinforced Al-7050 metal matrix composites for aeronautical applications
”,
International Conference on Newer Trends and Innovations in Mechanical Engineering (icontime - 2020)
, Materials Today Proceedings,
37
, pp.
2406
2414
(
2021
).
15.
B
.
Sridhar Babu
,
A.
Kumaraswamy
,
B.
Anjaneya
Prasad Investigation of Elasto-Plastic Deformation Behavior of Haynes242 Alloy Subjected to Nanoscale Loads through Indentation Experiments’
Transactions of Indian institute of metals
Springer
,
69
,
3
(
2016
):
759
766
16.
Sridhar
Babu
,
B.
Kumaraswamy
,
A. Anjaneya
Prasad
B. ‘Numerical analysis of effect of friction on mechanical properties of Ti-6Al-4VAlloy through Nanoindentation.’
Procedia Engineering
(
Elsevier
)
64
(
2013
)
1048
1055
17.
M. Saravana
Kumar
,
S
.
Sathees Kumar
,
B
.
Sridhar Babu
, and
CH. Nithin
Chakravarthy
.”
Influence of fiber loading on mechanical characterization of pineapple leaf and kenaf fibers reinforced polyester composites
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020)
, Materials Today Proceedings,
46
, pp.
439
444
(
2021
).
18.
S
.
Sathees Kumar
,
R.
Muthalagu
, and
Ch. Nithin
Chakravarthy
, “
Effects of fiber loading on mechanical characterization of pineapple leaf and sisal fibers reinforced polyester composites for various applications
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020)
, Materials Today Proceedings,
46
, pp.
546
553
(
2021
).
19.
B
.
Sridhar Babu
and
M.
Srinivas
, A Critical Review on Recent Research Methodologies in additive Manufacturing,
Materials today
(
Elsevier
)
4
,
8
(
2017
):
9049
9059
.
20.
Sridhar
Babu
,
B.
Kumaraswamy
, A.
Novel method of evaluating flow curve for SS304 form low cost indentation experiments
ARPN journal of engineering and Applied sciences
,
5
,
12
,
2010
, pp.
38
42
21.
R.
Muthalagu
,
J.
Murugesan
,
S
.
Sathees Kumar
, and
B
.
Sridhar Babu
, “
Tensile attributes and material analysis of Kevlar and date palm fibers reinforced epoxy composites for automotive bumper applications
”,
International Conference on Manufacturing, Material Science and Engineering
, Materials Today Proceedings, 4
6
, pp.
433
438
(
2021
).
22.
B
.
Sridhar Babu
,
Pawar Deepak
Dinkarrao
. ‘
Computational Fluid Dynamics and Experimental Analysis for Optimum Geometry of Vortex Tube
.’
International Journal of Innovative Research in Science, Engineering and Technology
, Volume
3
, Issue
8
,
2014
23.
S.
Sudhagar
,
V
.
Mugesh Raja
,
S
.
Sathees Kumar
, and
A
.
Jonathan Samuel
, “
The wear behavior and service life of Madar and Bauhinia Racemosa reinforced polyester hybrid composites for gear applications
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2019)
, Materials Today Proceedings,
19
, pp.
589
593
(
2021
).
24.
S
.
Sathees Kumar
, and
Ganesan
Kanagaraj
. “
Effect of graphite and silicon carbide fillers on mechanical properties of N6 polymer composites
.”
Journal of Polymer Engineering
37
.
6
(
2017
):
547
557
.
25.
S
.
Sathees Kumar
, and
G.
Kanagaraj
. “
Investigation on mechanical and tribological behaviors of N6 and graphite-reinforced N6 polymer composites
.”
Arabian Journal for Science and Engineering
41
.
11
(
2016
):
4347
4357
.
26.
S
.
Sathees Kumar
, and
G.
Kanagaraj
. “
Experimental investigation on tribological behaviours of N6, N6-reinforced Al2O3 and N6-reinforced graphite polymer composites
.”
Bulletin of Materials Science
39
.
6
(
2016
):
1467
1481
.
27.
S
.
Sathees Kumar
, and
G.
Kanagaraj
. “
Evaluation of mechanical properties and characterization of silicon carbide– reinforced polyamide 6 polymer composites and their engineering applications
.”
International Journal of Polymer Analysis and Characterization
21
.
5
(
2016
):
378
386
.
28.
S
.
Sathees Kumar
, and
G.
Kanagaraj
. “
Investigation of characterization and mechanical performances of Al2O3 and SiC reinforced N6 hybrid composites
.”
Journal of Inorganic and Organometallic Polymers and Materials
26
.
4
(
2016
):
788
798
.
29.
S
.
Sathees Kumar
and
B
.
Sridhar Babu
, “Experimental evaluation on wear and coefficient of frictional performance of Zirconium Oxide nano particles reinforced Polymer composites for gear applications”
Nanomaterials and Nanocomposites Characterization, Processing, and Applications
,
CRC Press
- ISBN: 978-1-003-16094-6, Ebook ISBN: 9781003160946, pp.
122
138
,
2021
.
30.
CH. Nithin
Chakravarthy
,
S
.
Sathees Kumar
,
R.
Muthalagu
,
Muthukumaran
Ramasamy
, “
Experimental investigation and optimization on surface parameters of ZrO2 nano particles reinforced Al-7050 metal matrix composites for aeronautical applications
”,
International Conference on Newer Trends and Innovations in Mechanical Engineering (icontime - 2020)
, Materials Today Proceedings,
37
, pp.
2406
2414
(
2021
).
31.
S
.
Sathees Kumar
,
CH. Nithin
Chakravarthy
,
M.
Nithya
, “
Processing and mechanical performances of ZrO2 reinforced thermoplastic Nylon 6 composites for gear applications
”,
International Conference on Newer Trends and Innovations in Mechanical Engineering (icontime - 2020)
, Materials Today Proceedings,
37
, pp.
3038
3044
(
2021
).
32.
S
.
Sathees Kumar
,
Ch. Nithin
Chakravarthy
and
R.
Muthalagu
, “Experimental evaluation on tribological behaviour of TiO2 reinforced polyamide composites validated by Taguchi and machine Learning methods”,
Computational Technologies in Materials Science
,
CRC Press
– ISBN – 9781003121954, pp.
25
,
2021
.
33.
S
.
Sathees Kumar
,
B
.
Sridhar Babu
,
CH. Nithin
Chakravarthy
,
R.
Muthalagu
, “
Mechanical characterization and thermal behaviors of tungsten carbide reinforced thermoplastic composites
”,
International Conference on Manufacturing, Material Science and Engineering (ICMMSE - 2020)
, Materials Today Proceedings,
46
, pp.
399
404
(
2021
).
34.
B
.
Sridhar Babu
and
Kaushik
Kumar
,
Temperature Dependence of Indentation Behavior of Ti-6Al-4V Alloy for Bio Medical Applications
Biointerface Research in Applied Chemistry
, ISSN: 2069-5837
35.
B
.
Sridhar Babu
,
A.
Kumaraswamy
,
B
.
Anjaneya Prasad
Effect of Indentation Size and Strain Rate on Nanomechanical Behavior of Ti-6Al-4V Alloy
Transactions of Indian institute of metals Springer
, Vol No.
67
, Issue No.
5
, October
2014
This content is only available via PDF.
You do not currently have access to this content.