State Polytechnic of Malang has a total area of 13.68 hectares. An adequate transportation mode is needed to reach the entire area. As an institution that supports the Green Campus program, State Polytechnic of Malang is actively promoting the use of renewable and environmentally friendly energy in the campus area, one form of activity is to build power stations for electric vehicles at several points in the campus area with solar power plants. To support the Green Campus program and meet the needs of environmentally friendly transportation modes, the design, and development of an e-scooter are carried out. E-scooter is designed as a transportation mode to speed up traveling outdoor or inside buildings within the campus area. The use of e-scooter can reduce pollution in the campus area, both emission or noise pollution. The method used includes designing and developing prototypes. The design process considering strength, comfort, and function. After the design, the developing process is carried out. The driving force of this e-scooter uses a 350 Watt BLDC motor using 39 units of lithium-ion Sony US18650VTC6 with a 13s3p arrangement as the power source. The result of the study is a functional, comfortable, strong e-scooter prototype as a transportation mode for all academics at the campus State Polytechnic of Malang. This scooter can be used in a wider area, for example in office areas, shopping centers, parks, or other public areas.

1.
Abiyyu
,
dkk
,
Design Requirements & Objectives pada Urban Skuter Elektris sebagai Penunjang Gaya Hidup Mobilitas Perkotaan Melalui Identifikasi Kebutuhan Persona
,
Jurnal Sains dan Seni ITS
, Vol.
8
, No.
2
,
2337
3520
(
2020
). https://doi.org/10.12962/j23373520.v8i2.49720
2.
Chou
,
J. R.
, and
Hsiao
,
S. W.
,
An anthropometric measurement for developing an electric scooter
,
International Journal of Industrial Ergonomics
,
35
(
11
),
1047
1063
(
2005
). https://doi.org/10.1016/j.ergon.2005.06.001
3.
Yuono
,
Agusta Tri
,
Desain Skuter Elektrik Pribadi Sebagai Penunjang Mobilitas Office Worker Untuk Masyarakat Perkotaan
. Undergraduate thesis,
Institut Teknologi Sepuluh Nopember
(
2018
). https://repository.its.ac.id/59554/
4.
Jatmiko
dkk
,
Analisa Performa dan Konsumsi Daya Motor BLDC 350W Pada Prototipe Mobil Listrik Ababil
,
Jurnal Teknik Elektro
, Vol
18
(
2
):
1
6
(
2018
). https://journals.ums.ac.id/index.php/emitor/article/view/6348/4172
5.
Wibowo
,
Y.C.
,
dan Slamet
Riyadi
,
Analisa Pembebanan Pada Motor Brushless DC (BLDC)
,
SNIKO
, Vol
6
(
1
):
1
6
(
2018
). http://journal.citaitb.com/sniko/article/view/80
6.
Chen
,
M.
,
Liu
,
J.
,
Ouyang
,
D.
,
Weng
,
J.
,
Wu
,
X.
,
Cao
,
S.
, &
Wang
,
J.
,
A large-scale experimental study on the thermal failure propagation behaviors of primary lithium batteries
,
Journal of Energy Storage
,
31
,
101657
(
2019
). https://doi.org/10.1016/j.est.2020.101657
7.
Choudhari
,
V. G.
,
Dhoble
,
D. A. S.
, &
Sathe
,
T. M.
,
A review on effect of heat generation and various thermal management systems for lithium-ion battery used for electric vehicle
,
Journal of Energy Storage
,
32
,
101729
(
2020
). https://doi.org/10.1016/j.est.2020.101729
8.
Park
,
H.
,
A design of air flow configuration for cooling lithium-ion battery in hybrid electric vehicles
.
Journal of Power Sources
,
239
,
30
36
(
2013
). https://doi.org/10.1016/j.jpowsour.2013.03.102
This content is only available via PDF.
You do not currently have access to this content.