The existing equipment for electrofusion welding of polyethylene pipes does not allow obtaining a high-quality connection at air temperatures below minus 10°C. It is proposed to additionally preheat the heat-affected zone of the welded joint with a built-in heater and control its cooling when welding under ambient conditions in the temperature range from minus 50 to plus 40°C. The results of calculations are presented that confirm the effectiveness of the proposed method for controlling the thermal welding process at low temperatures.

1.
ISO 12176-2:2008 Plastics pipes and fittings - Equipment for fusion jointing polyethylene systems - Part 2: Electrofusion. (
2008
).
2.
V. Yu.
Kargin
and
A. L.
Shurayts
,
Welding and control of polymer gas pipelines. For welders and welding specialists
(
OAO Privolzhskoe book publishing house
,
2003
) a full BOOK entry, [in Russian].
3.
N. P.
Starostin
and
O. A.
Ammosova
, “
Finite element modeling of the thermal process and calculation of the parameters of electrofusion welding of polyethylene pipes at low temperatures
,”
Information technology in design and production
2
,
69
75
(
2018
), [in Russian].
4.
N. P.
Starostin
,
O. A.
Ammosova
, and
M. A.
Vasileva
, “
Analysis of temperature field dynamics in electrofusion welding of polymer pipes at low temperatures
,”
IOP Conference Series: Earth and Environmental Science
666
,
032086
(
2021
), doi: .
5.
N. P.
Starostin
,
A. I.
Gerasimov
,
E. V.
Danzanova
, and
O. A.
Ammosova
,
R.F. Patent No. 2744141
(03 Mar. 2021), [in Russian].
6.
N. A.
Avdonin
,
Matematicheskoe opisanie protsessov kristallizatsii
(
Zinatne
,
Riga
,
1980
) pp.
73
92
, [in Russian].
7.
O.
Zienkiewicz
and
K.
Morgan
,
Finite Elements and Approximation
(
Dover Publications
,
New York
,
2006
) a full BOOK entry.
8.
O. M.
Alifanov
,
E. A.
Artyukhin
, and
S. V.
Rumyantsev
,
Extremal methods for solving incorrect problems
(
Nauka
,
Moscow
,
1988
) a full BOOK entry, [in Russian].
This content is only available via PDF.
You do not currently have access to this content.