The paper aims to determine the influence of alkaline treatment of cantala fiber on the flexural strength of composite friction brake. The specimens were composed of cantala fiber, phenolic resin, NBR powder, graphite, fly ash, cashew dust, molybdenum disulfide (MoS2), and calcium carbonate (CaCO3). The research method used was compression molding to manufacture specimens using cantala fiber of 0%, 4%, 8%, and 12% volume without alkaline treatment or with alkaline treatment. The alkaline treatment was carried out by soaking the cantala fiber in an alkaline solution (5% NaOH) with a soaking time of 4 hours. The results showed that alkaline treatment on the cantala fibers increased the strength and Young modulus of composites particularly at 4% and 8% volume of fiber.
Skip Nav Destination
Article navigation
30 November 2022
2021 2ND INTERNATIONAL CONFERENCE ON INFORMATION TECHNOLOGY, ADVANCED MECHANICAL AND ELECTRICAL ENGINEERING (ICITAMEE)
25–26 August 2021
Yogyakarta, Indonesia
Research Article|
November 30 2022
Influence of alkaline treatment of cantala fiber on flexural strength of composite friction brake
Akhmad Fauzan Priambada;
Akhmad Fauzan Priambada
a)
1
Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret
, Surakarta, Indonesia
57126
Search for other works by this author on:
Eko Surojo;
Eko Surojo
b)
1
Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret
, Surakarta, Indonesia
57126b)Corresponding author: esurojo@ft.uns.ac.id
Search for other works by this author on:
Nurul Muhayat;
Nurul Muhayat
c)
1
Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret
, Surakarta, Indonesia
57126
Search for other works by this author on:
Dharu Feby Smaradhana;
Dharu Feby Smaradhana
d)
1
Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret
, Surakarta, Indonesia
57126
Search for other works by this author on:
Wijang Wisnu Raharjo
Wijang Wisnu Raharjo
e)
1
Department of Mechanical Engineering, Faculty of Engineering, Universitas Sebelas Maret
, Surakarta, Indonesia
57126
Search for other works by this author on:
AIP Conf. Proc. 2499, 040009 (2022)
Citation
Akhmad Fauzan Priambada, Eko Surojo, Nurul Muhayat, Dharu Feby Smaradhana, Wijang Wisnu Raharjo; Influence of alkaline treatment of cantala fiber on flexural strength of composite friction brake. AIP Conf. Proc. 30 November 2022; 2499 (1): 040009. https://doi.org/10.1063/5.0105232
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Pay-Per-View Access
$40.00
27
Views
Citing articles via
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Related Content
Friction characteristics of hybrid composite brake block reinforced by cantala fiber, glass fiber and rockwool
AIP Conference Proceedings (March 2022)
Effect of alkali soaking time on physical and morphological properties of Agave cantala fiber
AIP Conference Proceedings (November 2022)
Effect of the Cantala fiber on flexural strength of composite friction brake
AIP Conference Proceedings (June 2018)
Effect of ZnS on frictional behaviour of composite friction brake
AIP Conf. Proc. (April 2019)
Effect of different reinforcement material on characteristics of composite friction brake
AIP Conference Proceedings (November 2022)