This paper is based on the design and fabrication of a 3D scanner that uses low-cost hardware and open-source software where the cost of hardware is reduced significantly using wood as construction material and eliminating the need for an IR sensor which is used to capture the dimensions of the objects which is done by netfabb in this scanner and making the application of this scanner limited to small objects. The hardware is controlled using Arduino UNO ATmega328p microcontroller and using Open-source free software like 3D zephyr for 2D to 3D model generation, Netfabb for scaling, MeshLab for clean-up and alignment and GOM inspect to compare the generated scans with professional scans and their respective CAD models.
REFERENCES
1.
Conrad
Tucker
and David B.
Saint John
, “Open-Source 3D Scanning and Printing for Design Capture and Realization” Proceedings of the ASME 2014 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference IDETC/CIE 2014
August 17-20, 2014
, Buffalo, NY, USA
2.
H. M.
Daanen
and G. J.
van de Water
, “Whole body scanners
,” Displays
, vol. 19
, no. 3
, pp. 111
–120
, NOV 1998
3.
Abdil
Kuş
, “Implementation of 3D Optical Scanning Technology for Automotive Applications
”, Sensors
2009
, 9
, 1967
–1979
, ISSN .4.
A. W. L
Yao
, “Applications of 3D scanning and reverse engineering techniques for quality control of quick response products
”, The International Journal of Advanced Manufacturing Technology
26
, pages 1284
–1288
(2005
).5.
Carrington
, P.
, Hosmer
, S.
, Yeh
, T.
, Hurst
, A.
, Kane
, S. K.
(2015
). “Like This, But Better
”: Supporting Novices’ Design and Fabrication of 3D Models Using Existing Objects. In iConference 2015 Proceedings
vol. 19
, no. 3
, pp. 111
–120
, Nov 2015.6.
Arnulfo León
Reyes
, Jesús Medina
Cervantes
, Nereyda Castro
Gutiérrez
, “Low-Cost 3D Scanner by Means of a 1D Optical Distance Sensor
”, Procedia Technology
, Volume 7
, 2013
, Pages 223
–230
, ISSN .7.
Hafeez
Anwar
, I.
Din
, Kang
Park
, “Projector calibration for 3D scanning using virtual target images
”, International Journal of Precision Engineering and Manufacturing
, Volume 13
, (2012
).8.
S.
Garrido-Jurado
, R.
Muñoz-Salinas
, F. J.
Madrid-Cuevas
, M. J.
Marín-Jiménez
, “Simultaneous reconstruction and calibration for multi-view structured light scanning
”, Elsevier Inc
, ISSN , (2016
).9.
Y.
Wang
, H.
Feng
, “Effects of scanning orientation on outlier formation in 3D laser scanning of reflective surfaces
”, Optics and Lasers in Engineering
, (2016
), volume 81
, pages 35
–45
.10.
Soon-Yong
Park
, Jaewon
Baek
, Jaekyoung
Moon
, “Hand-held 3D scanning based on coarse and fine registration of multiple range images
”, Machine Vision and Applications
, volume 22
, (2010
), pages 563
–579
.11.
R.
Jones
, P.
Haufe
, E.
Sells
, P.
Iravani
, V.
Olliver
, C.
Palmer
, and A.
Bowyer
, “RepRap – the replicating rapid prototyper
,” Robotica
, vol. 29
, no. Special Issue 01
, pp. 177
–191
, 2011
.12.
E.
Sells
, Z.
Smith
, S.
Bailard
, A.
Bowyer
, and V.
Olliver
, “RepRap: The Replicating Rapid Prototyper: Maximizing Customizability by Breeding the Means of Production,” Social Science Research Network
, Rochester, NY
, SSRN Scholarly
Paper ID 1594475.13.
C.
Baechler
, M.
DeVuono
, and J. M.
Pearce
, “Distributed recycling of waste polymer into RepRap feedstock
,” Rapid Prototyping Journal
, vol. 19
, no. 2
, pp. 118
–125
, Mar. 2013
.14.
D.
Lanman
and G.
Taubin
, “Build your own 3D scanner: 3D photography for beginners,” in ACM SIGGRAPH 2009 Courses
, New York, NY, USA
, 2009
, pp. 8
:1–8
:94
.15.
N.
Vasudevan
and C. S.
Tucker
, “Digital Representation of Physical Artifacts: The Effect of Low Cost, High Accuracy 3D Scanning Technologies on Engineering Education, Student Learning and Design Assessments,” in Proceedings of the 2013 ASME IDETC/CIE
, DETC2013-12651, Portland
, Oregon
, 2013
.
This content is only available via PDF.
© 2022 Author(s).
2022
Author(s)
You do not currently have access to this content.