The authors discuss the process of ceramic-polymer filament obtaining based on aluminum oxide (Al2O3) and polylactide (PLA) for its use in 3D printing technology by fused deposition modeling method (FDM). They consider ceramic polymer compositions with the following component ratio: 30% PLA and 70% Al2O3; 40% PLA and 60% Al2O3; 50% PLA and 50% Al2O3. The compositions were obtained by the colloidal method on a ball mill in distilled water, followed by drying in a vacuum oven and sieving. The microstructure and elemental composition of the mixtures have been studied. The modes of extrusion of the obtained ceramic-polymer compositions are selected. The most advantageous composition of a ceramic-polymer mixture of 40% PLA and 60% Al2O3 has been determined for further use in creating three-dimensional objects by FDM. Experimental samples of products from the produced ceramic-polymer filament were printed.

Topics
Vacuum apparatus, 3D printing, Materials synthesis and processing, Polymers, Ceramics, Oxides
1.
N.
 
Travitzky
,
A.
 
Bonet
,
B.
 
Dermeik
,
T.
 
Fey
,
I.
 
Filbert-Demut
,
L.
 
Schlier
,
T.
 
Schlordt
, and
P.
 
Greil
,
Advanced Engineering Materials
 
16
(
6
)
729
–
754
(
2014
).
https://doi.org/10.1002/adem.201400097
Google Scholar
Crossref
Search ADS
 
2.
D.
 
Nötzel
,
R.
 
Eickhoff
 and
T.
 
Hanemann
,
Materials
 
11
(
8
)
1463
(
2018
).
https://doi.org/10.3390/ma11081463
Google Scholar
Crossref
Search ADS
PubMed
 
3.
A
 
Juan
,
Characterization of polymeric binders for metal injection molding (MIM) process
(
University of Akron
,
Ohio, United States
,
2007
).
Google Scholar
 
4.
B.
 
Khatri
,
K.
 
Lappe
,
M.
 
Habedank
,
T.
 
Mueller
,
C.
 
Megnin
 and
T.
 
Hanemann
,
Polymers
 
10
(
6
)
666
(
2018
).
https://doi.org/10.3390/polym10060666
Google Scholar
Crossref
Search ADS
PubMed
 
5.
J.
 
Abel
,
U.
 
Scheithauer
,
T.
 
Janics
,
S.
 
Hampel
,
S.
 
Cano
,
A.
 
Müller-Köhn
,
A.
 
Günther
,
C.
 
Kukla
 and
T. Moritz
 
JoVE
 (
Journal of Visualized Experiments)
 
143
 
57693
(
2019
).
Google Scholar
 
6.
S.J.
 
Kalita
,
S.
 
Bose
 and
L.H.
 
Hosick
,
Materials Science and Engineering
 
23
(
5
)
611
–
620
(
2003
).
https://doi.org/10.1016/S0928-4931(03)00052-3
Google Scholar
Crossref
Search ADS
 
7.
J.
 
Deckers
,
J.
 
Vleugels
, and
J.P.
 
Kruth
,
Journal of Ceramic Science and Technology
 
5
 
245
–
260
(
2014
).
Google Scholar
 
8.
Ph.
 
Bertrand
,
F.
 
Bayle
,
C.
 
Combe
,
P.
 
Goeuriot
 and
I.
 
Smurov
,
Applied Surface Science
 
254
 
989
–
992
(
2007
).
https://doi.org/10.1016/j.apsusc.2007.08.085
Google Scholar
Crossref
Search ADS
 
9.
H.
 
Exner
,
M.
 
Horn
,
A.
 
Streek
,
F.
 
Ullmann
,
L.
 
Hartwig
,
P.
 
Regenfuss
 and
R.
 
Ebert
,
Virtual and Physical Prototyping
 
3
 
3
–
11
(
2008
).
https://doi.org/10.1080/17452750801907970
Google Scholar
Crossref
Search ADS
 
10.
J.
 
Wilkes
,
Y.C.
 
Hagedorn
,
W.
 
Meiners
 and
K.
 
Wissenbach
,
Rapid Prototyping Journal
 
19
 
51
–
57
(
2013
).
https://doi.org/10.1108/13552541311292736
Google Scholar
Crossref
Search ADS
 
11.
Z.
 
Chen
,
Z.
 
Li
,
J.
 
Li
,
C.
 
Liu
,
C.
 
Lao
,
Y.
 
Fu
,
C.
 
Liu
,
Y.
 
Li
,
P.
 
Wang
 and
Y.
 
He
,
Journal of the European Ceramic Society
 
39
(
4
)
661
–
687
(
2019
).
https://doi.org/10.1016/j.jeurceramsoc.2018.11.013
Google Scholar
Crossref
Search ADS
 
12.
A.
 
Fawaz
,
International Journal of Scientific & Engineering Research
 
7
(
5
)
41
–
43
(
2016
).
Google Scholar
 
13.
A.
 
Smirnov
,
P.
 
Peretyagin
 and
J.F.
 
Bartolomé
,
Journal of the European Ceramic Society
 
39
 
3491
–
3497
(
2019
).
https://doi.org/10.1016/j.jeurceramsoc.2019.02.044
Google Scholar
Crossref
Search ADS
 
14.
J. F.
 
Bartolomé
,
A.
 
Smirnov
,
H-D.
 
Kurland
,
J.
 
Grabow
 and
F.A.
 
Müller
,
Scientific Reports
 
6
 
20589
(
2016
).
https://doi.org/10.1038/srep20589
Google Scholar
Crossref
Search ADS
PubMed
 
15.
A.
 
Smirnov
,
A.
 
Seleznev
,
W.
 
Solis
,
Y.
 
Pristinskiy
,
P.
 
Peretyagin
 and
J.F.
 
Bartolomé
,
Nanomaterials
 
9
(
10
)
1391
(
2019
).
https://doi.org/10.3390/nano9101391
Google Scholar
Crossref
Search ADS
PubMed
 
This content is only available via PDF.
© 2022 Author(s).
2022
Author(s)
You do not currently have access to this content.