Jet pumps have a wide range of applications and are commonly used in thermal electro stations and refrigeration constructions. Original project of the jet pump was developed in researches with using an analytical approach, and its efficiency was improved using an efficient and accurate computational model of the fluid dynamics of compressible turbulent flow in the pump, the predictions of which were in good agreement with the corresponding experimental data. Parametric studies were performed to determine the effect of pump geometry on pump performance. In this article discussed the theoretical basis of the kinematic parameters of the suction pipe designed to clean the water basins from turbidity, including the dependence of the average flow rate on the pressure change in the mixing chamber. In the case, the fluid is considered to be single-phase, i.e., the densities of the working and absorbed liquids are the same.
Skip Nav Destination
,
,
,
,
Article navigation
16 June 2022
THE 1ST INTERNATIONAL CONFERENCE ON PROBLEMS AND PERSPECTIVES OF MODERN SCIENCE: ICPPMS-2021
10–11 June 2021
Tashkent, Uzbekistan
Research Article|
June 16 2022
Influence of kinematic flow parameters on vacuum in jetters Available to Purchase
Qudrat Rakhimov;
Qudrat Rakhimov
a)
1
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers
, 39, Kari Niyaziy str., 100000, Tashkent, Uzbekistan
a)Corresponding author: [email protected]
Search for other works by this author on:
Ifoda Ahmedkhodjaeva;
Ifoda Ahmedkhodjaeva
1
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers
, 39, Kari Niyaziy str., 100000, Tashkent, Uzbekistan
Search for other works by this author on:
Abduhalil Rakhimov;
Abduhalil Rakhimov
2
Tashkent State University of Economics
, 100003, Tashkent, Uzbekistan
Search for other works by this author on:
Dilbar Abduraimova;
Dilbar Abduraimova
1
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers
, 39, Kari Niyaziy str., 100000, Tashkent, Uzbekistan
Search for other works by this author on:
Nusratillo Latipov
Nusratillo Latipov
3
Tashkent State Transport University
, 1, Adilkhodjaev str., 100167, Tashkent, Uzbekistan
Search for other works by this author on:
Qudrat Rakhimov
1,a)
Ifoda Ahmedkhodjaeva
1
Abduhalil Rakhimov
2
Dilbar Abduraimova
1
Nusratillo Latipov
3
1
Tashkent Institute of Irrigation and Agricultural Mechanization Engineers
, 39, Kari Niyaziy str., 100000, Tashkent, Uzbekistan
2
Tashkent State University of Economics
, 100003, Tashkent, Uzbekistan
3
Tashkent State Transport University
, 1, Adilkhodjaev str., 100167, Tashkent, Uzbekistan
a)Corresponding author: [email protected]
AIP Conf. Proc. 2432, 030068 (2022)
Citation
Qudrat Rakhimov, Ifoda Ahmedkhodjaeva, Abduhalil Rakhimov, Dilbar Abduraimova, Nusratillo Latipov; Influence of kinematic flow parameters on vacuum in jetters. AIP Conf. Proc. 16 June 2022; 2432 (1): 030068. https://doi.org/10.1063/5.0089505
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
18
Views
Citing articles via
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Classification data mining with Laplacian Smoothing on Naïve Bayes method
Ananda P. Noto, Dewi R. S. Saputro
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Related Content
Evaluation of sedimentation of water reservoirs with modern technologies
AIP Conf. Proc. (June 2022)
Selection of electric motors power for lifting a flat survey in hydraulic structures
AIP Conf. Proc. (June 2022)
Patterns of location and conditions of formation and accumulations of natural bitumen and high-viscosity oils in geology of Uzbekistan
AIP Conf. Proc. (June 2022)
Efficiency of use of resource-saving technology in reducing irrigation erosion
AIP Conf. Proc. (June 2022)