The nano-coating process is a challenge in the current industry to improve mechanical properties. There are many coating processes in the industry to apply on various metals for improving mechanical properties. These are costly mechanical processes. Today industry is looking at nano-coating with a simple mechanism to improve the mechanical properties. In this study, the nano-coating process was applied to the metals with the application of heat treatment. Another challenge in this study is to surface preparation of the metals. The surface preparation influences the nano-coating process.
Topics
Industry
REFERENCES
1.
Sammaiah
, P.
, Ashwini
, V.
, Suresh
, A.
, Sushanth
, C.
, & Kumar
, N. S.
(2018
). Analysis of Al2O3 Nano- Particles and Its Deposition on Steel by Cold Spray Process
. Materials Today: Proceedings
, 5
(9
), 20535
–20543
.2.
Sammaiah
, P.
, Vineetha
, B.
, Suresh
, A.
, Sushanth
, C.
, & Kumar
, N. S.
(2018
). Analysis of MgO Nano- Particles and Its Deposition on Steel by Cold Spray Process
. Materials Today: Proceedings
, 5
(9
), 19262
–19269
.3.
Sammaiah
, P.
, Snehaa
, M.
, Khaseema
, M.
, & Kumarb
, N. S.
(2017
). Effect of Heat Treatment & Machining Process for Deposition of Al2O3 Nano Particles on Steel
.4.
Kumar
, V. A.
, & Sammaiah
, P.
(2018
). Comparison of process parameters influence on mechanical and metallurgical properties of zinc coating on mild steel and aluminium during mechanical process
. Mater. Today Proc
, 5
, 3861
–3866
.5.
Sheu
, H. H.
, Hong
, T. Y.
, Lin
, T. T.
, & Ger
, M. D.
(2018
). The Effect of Heat Treatment on the Corrosion Resistance, Mechanical Properties and Wear Resistance of Cr− C Coatings and Cr− C/Al2O3 Composite Coatings Electrodeposited on Low Carbon Steel
. Int. J. Electrochem. Sci
, 13
, 9399
–9415
6.
Martínez-Hernández
, A.
, Méndez-Albores
, A.
, Arciga-Duran
, E.
, Flores
, J. G.
, Pérez-Bueno
, J. J.
, Meas
, Y.
, & Trejo
, G.
(2019
). Effect of heat treatment on the hardness and wear resistance of electrodeposited Co-B alloy coatings
. Journal of Materials Research and Technology
, 8
(1
), 960
–968
.7.
Ashassi-Sorkhabi
, H.
, & Es'haghi
, M.
(2014
). Corrosion protection of mild steel by nano-colloidal polyaniline/nanodiamond composite coating in NaCl solution
. Journal of Coatings Technology and Research
, 11
(3
), 371
–380
.8.
Rajesh
Kumar
Singh1*, Manjay
Kumar
Thakur2 and Shabana
Latif
2 1 Department of Chemistry, Jagdam College, J P University, Chpara-84130, India 2 Research Scholar, Department of Chemistry, Jagdam College, J P University, Chapra, India.9.
Scendo
, M.
, & Szczerba
, K.
(2019
). Influence of Heat Treatment on Corrosion of Mild Steel Coated with WC-Co-Al2O3 Cermet Composite Produced by Electrospark Deposition
. Int. J. Electrochem. Sci
, 14
, p1009
-1023
.10.
Arthanareeswari
, M.
, Kamaraj
, P.
, Tamilselvi
, M.
, & Devikala
, S.
(2018
). A low temperature nano TiO2 incorporated nano zinc phosphate coating on mild steel with enhanced corrosion resistance
. Materials Today: Proceedings
, 5
(2
), 9012
–9025
.11.
Singh
, R. K.
, Thakur
, M. K.
, & Latif
, S.
(2018
). Mild Steel corrosion control by nanocoating and filler compounds in hostile environments
. J of J Material Science
, 4
(3
),. Mild steel Corrosion Control by the Nanocoating and Filler Compounds in Hostile Environments.
This content is only available via PDF.
© 2022 Author(s).
2022
Author(s)
You do not currently have access to this content.