Al (6061) alloy castings are prepared in liquid metallurgy technique with Gr and WC particulates as reinforcement with 4 wt. % and 0-4 wt. % respectively are prepared. Castings are prepared as per ASTM standards and are T6 heat- treated. Ageing of the specimen is carried out at 1750C for different durations such as 1, 3 and 5 h. The heat treatment effect on the hardness, wear and coefficient of friction was explored for different compositions by varying wt. % of WC. optimal mechanical properties are noted when the materials are reinforced with 3wt. %WC and aged for 5 h.
REFERENCES
1.
U.
Sanchez-Santana
, C.
Rubio-Gonzalez
, G.
Gomez-Rosas
, J.L.
Ocana
, C.
Molpeceres
, J.
Porro
, M.
Morales
, Wear and friction of 6061-T6 aluminum alloy treated by laser shock processing
, Wear
260
(2006
) 847
–854
.2.
Veeresh Kumar
G.B
, C.S.P.
Rao
, Bhagyashekar
M.S.
, Selvaraj
N.
, “Mechanical and Tribological Behaviour of Al6061 – SiCP Composites
” Proceedings of International Conference on Recent Trends in Materials and Mechanical Engineering (ICMME 2008
), 18-20 December 2008, INDIA.3.
Veeresh Kumar
G.B.
, C.S.P.
Rao
, Bhagyashekar
M.S.
, Selvaraj
N.
, “Mechanical and Tribological Behaviour of Al7075-Al2O3 Composites
”, International Conference on RAMPT’09, INDIA
, Feb. 2009
.4.
Veeresh Kumar
G.B.
, C.S.P
Rao
, Bhagyashekar
M.S.
, Selvaraj
N.
, “Mechanical Properties of Particulate Reinforced (Al6061-Al2O3 and Al7075-SiCp) Composites”, MEMS-08, Anjuman Engg College, Bhatkal
, Karnataka, INDIA
, Oct-2008.5.
Veeresh
Kumar
G.B., C.S.P
Rao
, Selvaraj
N.
, Bhagyashekar
M.S.
, “Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites
”, Journal of Minerals & Materials Characterization & Engineering, (JMMCE), USA
, Volume 9
, (2009
), No.1
, pp. 47
–59
.6.
B.K.
Prasad
, K.
Venkateshwaralu
, O.P.
Modi
, S.
Das
, A.K.
Jha
, R.
Dasgupta
, A.H.
Yegneswaran
, Effects of SiC dispersion on the sliding wear characteristics of an Al–Cu alloy
, in: D.H.
Sastry
, S.
Subramaniam
, K.S.S.
Murthy
, K.P.
Abraham
(Eds.), Proceedings of the International Conference on Aluminium, INCAL’98
, New Delhi
, 1998
, pp. 9
–16
.7.
C.S.
Ramesh
, A.R. Anwar
Khan
, A.
Ramachandra
, Heat treatment of Al6061–10 wt% SiC composites
, in: A.F.M. Anwarul
Haque
, M.
Ahmed
, A.N. Mustafizul
Karim
, N.R.
Dhar
, S.
Begum
(Eds.), Proceedings of the International Conference on Manufacturing, ICM 2002
, Dhaka
, 2002
, pp. 21
–28
.8.
Abdulhaqq A.
Hamid
, P.K.
Ghosh
, S.C.
Jain
, Subrata
Ray
, “The influence of porosity and particles content on dry sliding wear of cast in situ Al(Ti)–Al2O3(TiO2) composite
”, Wear
, 265
, (2008
), Issues 1-2
, pp 14
–26
.9.
A.K.
Mondal
, S.
Kumar
, “Dry sliding wear behaviour of magnesium alloy based hybrid composites in the longitudinal direction
”, Wear
267
(2009
) 458
–466
.10.
S.
Basavarajappa
, G.
Chandramohan
, Arjun
Mahadevan
, Mukundan
Thangavelu
, R.
Subramanian
, P.
Gopalakrishnan
, “Influence of sliding speed on the dry sliding wear behaviour and the subsurface deformation on hybrid metal matrix composite
”, Wear
262
(2007
) 1007
–1012
.11.
Hui-Hui
Fu
, Kyung-Seop
Han
, Jung-Il
Song
, “Wear properties of Saffil/Al, Saffil/Al2O3/Al and Saffil/SiC/Al hybrid metal matrix composites
” Wear
256
(2004
) 705
–713
.12.
S.K.
Biswas
, B.N. Pramila
Bai
, Dry wear of Al–graphite particle composites
, Wear
68
(1981
) 347
–359
.13.
R.N.
Rao
, S.
Das
, D.P.
Mondal
, G.
Dixit
, Effect of heat treatment on the sliding wear behaviour of aluminium alloy (Al–Zn–Mg) hard particle composite
, Tribology International
43
(2010
) 330
–339
.14.
C.S.
Ramesh
, R.
Keshavamurthy
, B.H.
Channabasappa
, S.
Pramod
, Influence of heat treatment on slurry erosive wear resistance of Al6061 alloy
, Materials and Design
30
(2009
) 3713
–3722
.15.
Rong
Chen
, Akira
Iwabuchi
, Tomoharu
Shimizu
, The effect of a T6 heat treatment on the fretting wear of SiC particle-reinforced A356 aluminium alloy matrix composite
, Wear
238
(2000
) 110
–119
.16.
R.R.
Ambriz
, G.
Barrera
, R.
Garcia
, V.H.
Lopez
, The microstructure and mechanical strength of Al-6061-T6 GMA welds obtained with the modified indirect electric arc joint
, Materials and Design
31
(2010
) 2978
–2986
.17.
H.R.
Lashgari
, Sh.
Zangeneh
, H.
Shahmir
, M.
Saghafi
, M.
Emamy
, Heat treatment effect on the microstructure, tensile properties and dry sliding wear behavior of A356–10%B4C cast composites
, Materials and Design
31
(2010
) 4414
–4422
.18.
H. Khalid
Rafi
, G.D. Janaki
Ram
, G.
Phanikumar
, K. Prasad
Rao
, Microstructure and tensile properties of friction welded aluminum alloy AA7075-T6
, Materials and Design
31
(2010
) 2375
–2380
.19.
Z.
Nikseresht
, F.
Karimzadeh
, M.A.
Golozar
, M.
Heidarbeigy
, Effect of heat treatment on microstructure and corrosion behavior of Al6061 alloy weldment
, Materials and Design
31
(2010
) 2643
–2648
.20.
Cheng-Yu
Chou
, Che-Wei
Hsu
, Sheng-Long
Lee
,Kuan-Wen
Wang
, Jing-Chie
Lin
, Effects of heat treatments on AA6061 aluminum alloy deformed by cross-channel extrusion
, journal of materials processing technology
202
(2008
) 1
–6
.21.
R.J.
Arsenault
, N.
Shi
, Dislocation generation due to differences between the co-efficient of thermal expansion
, J. Mater. Sci. Eng.
81
(1986
) 175
–187
.22.
23.
K.
Mahadevan
, K.
Raghukandan
, T.
Senthilvelan
, B.C.
Pai
, U.T.S.
Pillai
, Investigation on the influence of heattreatment parameters on the hardness of AA6061-SiCp composite
, Journal of Materials Processing Technology
171
(2006
) 314
–318
.24.
Mahagundappa M.
Benal
, H.K.
Shivanand
, “Effects of reinforcements content and ageing durations on wear characteristics of Al (6061) based hybrid composites
”, Wear
262
(2007
) 759
–763
.25.
Jen Fin
Lin
, Ming Guu
Shih
, Yih Wei
Chen
, “The tribological performance of 6061 aluminum alloy/graphite composite materials in oil lubrications with EP additives
”, Wear
198
(1996
) 58
–70
.26.
C.S.
Ramesha
, Mir
Safiulla
, “Wear behavior of hot extruded Al6061 based composites
”, Wear
263
(2007
) 629
–635
.27.
Veeresh
Kumar.G.B
, C.S.P.
Rao
, Selvaraj
N.
, Bhagyashekar
M.S.
, “Studies on Al6061-SiC and Al7075-Al2O3 Metal Matrix Composites
”, Journal of Minerals & Materials Characterization & Engineering, (JMMCE), USA
, Volume 9
, (2009
), No.1
, pp. 47
–59
.28.
Dieter
, G.E.
Mechanical Metallurgy, SI Metric edition
, McGrawHill
, New york
, 1998
, pp. 212
–219
.29.
Callister
, W. D.
Jr
Materials Science and Engineering: An Introduction
, 2nd edition, John Wiley
, New York
, 1991
, p. 536
.
This content is only available via PDF.
© 2021 Author(s).
2021
Author(s)
You do not currently have access to this content.