Samples of refractory products based on metallurgical production wastes were obtained and studied at various ratios of components in a wide temperature range of 100–1650 °C. Their ultimate compressive strength (MPa), refractoriness, heat resistance, density (g / cm3) and shrinkage (%) were determined. A graphical representation of changes in the mechanical properties of fired refractories in the coordinates: ultimate strength in compression, MPa (σ) and firing temperature (T ° C) is presented.

The original version of this article supplied to AIP Publishing excluded the acknowledgement section. The missing acknowledgment can be found below: This research was funded by the Science Committee of the Ministry of Education and Science of the Republic of Kazakhstan (Grant No. AP08857429). This acknowledgment was added on 23 July 2021.

Topics
Materials properties
1.
E.
 
Matinde
,
G.
 
Simate
,
The Journal of the Southern African Institute of Mining and Metallurgy
,
118
(
2018
), p.
825
–
844
.
https://doi.org/10.17159/2411-9717/2018/v118n8a5
Google Scholar
Crossref
Search ADS
 
2.
M. A.
 
Reuter
,
C.
 
Hudson
,
A.
 
Van Schaik
,
Metal Recycling: Opportunities, Limits, Infrastructure
.
Report of the Working Group on the Global Metal Flows to the International Resource Panel. UNEP
,
2013
,
316
p
Google Scholar
 
3.
S.M.
 
Fomenko
,
A.
 
Akishev
,
S.
 
Tolendiuly
,
Materials Today: Proceedings
,
2020
.
https://doi.org/10.1016/j.matpr.2020.05.198
Google Scholar
 
4.
A.K.
 
Akishev
, A.K.,
Fomenko
,
S.M.
,
Tolendiuly
,
S.
,
Refractories and Industrial Ceramics
,
60
(
2020
), p.
561
–
565
.
https://doi.org/10.1007/s11148-020-00407-1
Google Scholar
Crossref
Search ADS
 
5.
A.K.
 
Akishev
,
S.M.
 
Fomenko
,
S.
 
Tolendiuly
,
Novye ogneupory (New refractories)
,
11
(
2019
), p.
34
–
38
.
Google Scholar
 
6.
I.D.
 
Kashcheev
,
M.G.
 
Ladygichev
,
Unshaped refractories, Properties and application of unshaped refractories, Heat and power engineering
,
2003
, p.
400
.
Google Scholar
 
7.
Yu.E.
 
Pivinsky
,
Unshaped refractories, General issues of technology, Teploenergetik
,
2003
, p.
448
.
Google Scholar
 
8.
S.A.
 
Suvorov
,
Bulletin of the St. Petersburg State Technological Institute
,
2
(
2007
), p.
3
–
8
.
Google Scholar
 
9.
S.A.
 
Suvorov
,
New refractory materials
,
3
(
2002
), p.
38
–
45
.
Google Scholar
 
10.
L.B.
 
Horoshavin
,
Forsterite, Heat engineer
,
2004
, p.
368
.
Google Scholar
 
11.
V.A.
 
Perepelitsyn
,
Refractories
,
10
(
1986
), p.
15
–
18
.
Google Scholar
 
12.
Yu.I.
 
Savchenko
,
I.R.
 
Stepanova
,
Collection of scientific works of complex and rational use of magnesia raw materials and refractories, Metallurgy
,
1987
, p.
54
–
58
.
Google Scholar
 
13.
J.
 
White
,
Factors determining the structure of multiphase ceramics, Collected Works of I and II conference of the British and Dutch ceramic societies: translated from English
,
1967
, p.
140
–
161
.
Google Scholar
 
14.
V.A.
 
Perepelitsyn
,
Fundamentals of technical mineralogy and petrography
,
1987
, p.
225
.
Google Scholar
 
15.
A.S.
 
Berezhnoy
,
Multicomponent alkaline oxide systems
,
1998
, p.
200
.
Google Scholar
 
16.
V.M.
 
Rytvin
,
V.A.
 
Perepelitsin
,
A.A.
 
Ponomarenko
,
S.I.
 
Gilvarg
,
New refractories
,
10
(
2017
), p.
8
–
14
.
Google Scholar
 
17.
V.P.
 
Barzakovsky
,
State diagrams of silicate systems
, Issue
4
, Ternary oxide systems,
1974
, p.
514
.
Google Scholar
 
18.
M.
 
Bugdayci
,
A.
 
Turan
,
M.
 
Alkan
,
O.
 
Yucel
,
Effect of reductant type on the metallothermic magnesium production process
,
High Temperature Materials and Processes
, Vol.
37
, Issue
1
, p.
1
–
8
.
https://doi.org/10.1515/htmp-2016-0197
Crossref
Search ADS
 
This content is only available via PDF.
© 2021 Author(s).
2021
Author(s)
You do not currently have access to this content.