Saturated steam is still the dominant mode of medical sterilization due to its effectiveness, safety, rapidity, low- cost and relative simplicity compared to other techniques. However, steam sterilizers (autoclaves) are one of the most energy consuming medical equipment in hospitals. Despite the variety of features and techniques introduced by manufacturers, a holistic and systematic method need to be performed to ensure a broad and accurate energy saving analysis adapted to each case. Based on the developed method by authors; we provide another way of performing energy analysis of a standard steam sterilizer which is simple, yet accurate and holistic. This paper aims to enlighten many energy-saving opportunities poorly investigated hitherto in literature. Regardless of its qualitative character, the study highlighted many instructive points, not the least of which are induction heating external steam generator, heat recovery, sterilization time and sterilizer oversizing losses.

Topics
Energy analysis, Electrodynamics, Steam generator, Biomedical equipment
1.
F.
 
McGain
,
G.
 
Moore
,
J.
 
Black
,
Journal of Health Services Research & Policy
,
Hospital steam sterilizer usage: could we switch off to save electricity and water?
Vol.
21
, No.
3
,
166
–
171
(
2016
).
https://doi.org/10.1177%2F1355819615625698
Google Scholar
 
2.
L.
 
Cao
,
Y.
 
Jin
,
S.
 
Ma
,
Chinese Journal of Hospital Administration
,
Energy-saving management of steam sterilizers in hospital’s sterilization and supply center, Vol
.
33
, No.
12
,
930
–
934
(
2017
). http://wprim.whocc.org.cn/admin/article/articleDetail?WPRIMID=665763&articleId=665763
Google Scholar
 
3.
World Health Organization (WHO)
,
Decontamination and reprocessing of medical devices for health-care facilities
,
2006
.
4.
Comité Européen de Normalisation (CEN)
,
EN 556-1:2001, Sterilization of medical devices. Requirements for medical devices to be designated “STERILE
”.
Requirements for terminally sterilized medical devices.
 
2001
5.
World Health Organization (WHO)
,
Maintenance manual for laboratory equipment
, 2nd ed.,
2008
.
6.
B.M.
 
Andersen
, “Sterilization,” in
Prevention and Control of Infections in Hospitals,
edited by
Springer
,
Cham
,
849
–
858
(
2019
).
Google Scholar
Crossref
Search ADS
 
7.
Association for the Advancement of Medical Instrumentation (AAMI)
,
AAMI ST79, Comprehensive guide to steam sterilization and sterility assurance in health care facilities
.
2017
8.
C.
 
Spry
,
AORN journal, Understanding Current Steam Sterilization Recommendations and Guidelines
, Vol.
88
, No.
4
, October
2008
.
Google Scholar
 
9.
M.
 
Dion
 and
W.
 
Parker
,
Pharmaceutical engineering, Steam Sterilization Principles
, Vol.
33
, No.
6
, (
2013
).
Google Scholar
 
10.
Centers for Disease Control and Prevention (CDC)
,
Steam Sterilization: Guideline for Disinfection and Sterilization in Healthcare Facilities
,
2008
. https://www.cdc.gov/infectioncontrol/guidelines/disinfection/sterilization/steam.html
11.
G.E.
 
McDonnell
,
Antisepsis, disinfection, and sterilization,
 second edition, (
ASM Press
,
Washington DC
,
2017
).
Google Scholar
Crossref
Search ADS
 
12.
Comité Européen de Normalisation (CEN)
,
EN 285:2015, Sterilization - Steam sterilizers - Large sterilizers
.
2015
.
13.
J.P.C.M.
 
van Doornmalen
,
M.
 
Verschueren
 and
K.
 
Kopinga
,
J. Phys. D: Appl. Phys.
 
Penetration of water vapour into narrow channels during steam sterilization processes, Vol
.
46
, No.
6
(
2013
).
https://doi.org/10.1088/0022-3727/46/6/065201
Google Scholar
 
14.
STERIS Corporation
,
Guide to Steam Sterilization Cycles – Steam Flush Pressure Pulse
,
2015
.
15.
C.
 
Spry
,
Essentials of Perioperative Nursing,
 4th Edition, (
Jones & Bartlett publishers
,
Sudbury Massachusetts
,
2009
), pp.
31
–
42
.
Google Scholar
 
16.
K.
 
Jemmad
,
A.
 
Hmidat
, and
A.
 
Saad
,
International Journal of Renewable Energy Research
,
An Extended Model to Analyze Energy Saving: Parameters and Composition, Vol
.
8
, No.
1
,
495
–
503
(
2018
).
Google Scholar
 
17.
J.
 
Fitch
,
M.
 
Laporte
,
J.
 
Nussbaum
,
A.
 
Kern
, and
S.
 
Barney
,
Fact Sheet on Steam Sterilizers at Stanford University
,
2013
. https://suwater.stanford.edu/sites/g/files/sbiybj7756/f/sem_steamsterilizers_stanford_2013.pdf
Google Scholar
 
18.
J.
 
Koeller
,
Evaluation of Potential Best Management Practices-Steam Sterilizer Retrofits
,
2004
. http://toolbox.calwep.org/w/images/e/ed/Steam_Sterilizer_Retrofit-PBMP-2004.pdf
Google Scholar
 
19.
S.
 
Crow
,
Infection Control and Hospital Epidemiology, Steam Sterilizers: An Evolution in Design
Vol.
14
, No.
8
,
488
–
490
(
1993
).
https://doi.org/10.2307/30145524
Google Scholar
Crossref
Search ADS
 
20.
Direction générale de la santé- République de la France
,
Circulaire DGS/5 C/DHOS/E 2 n° 2001-138 du 14 mars 2001
,
2001
. https://solidarites-sante.gouv.fr/fichiers/bo/2001/01-11/a0110756.htm
21.
N.
 
Hygis
,
Hygiène hospitalière
(
Presses Universitaires Lyon
,
Lyon
,
1998
), pp.
213
–
239
.
Google Scholar
 
22.
T.
 
Kameda
,
K.
 
Ohkuma
,
N.
 
Sano
,
N.
 
Batbayar
,
Y.
 
Terashima
, and
K.
 
Terada
,
orthodontics waves
,
Development of a compact induction-heated autoclave with a dramatically shortened sterilization cycle in orthodontic clinics, Vol
.
73
, No.
2
,
55
–
60
(
2014
).
https://doi.org/10.1016/j.odw.2014.03.001
Google Scholar
Crossref
Search ADS
 
23.
O.
 
Lucía
,
P.
 
Maussion
,
E.J.
 
Dede
, and
J.M.
 
Burdío
,
IEEE transactions on industrial electronics, Induction Heating Technology and Its Applications: Past Developments
,
Current Technology, and Future Challenges
, Vol.
61
, No.
5
,
2509
–
2520
(
2014
).
Google Scholar
 
24.
P.K.
 
Sadhu
,
N.
 
Pal
,
A.
 
Bandyopadhyay
 and
D.
 
Sinha
,
2010 The 2nd International Conference on Computer and Automation Engineering (ICCAE), Singapore, Review of Induction Cooking - a Health Hazards Free Tool to Improve Energy Efficiency as compared to Microwave Oven
,
650
–
654
(
2010
).
25.
J.
 
Acero
,
J.M.
 
Burdio
,
L.A.
 
Barragán
,
D.
 
Navarro
,
R. Alonso J.R.
 
García
,
F.
 
Monterde
,
P.
 
Hernández
,
S.
 
Llorente
, and
I.
 
Garde
,
2008 Twenty-Third Annual IEEE Applied Power Electronics Conference and Exposition, Austin, Texas, The domestic induction heating appliance: an overview of recent research
,
651
–
657
(
2008
).
26.
H.M.
 
El-Mashad
, and
Z.
 
Pan
,
Food Eng. Rev.
 
Application of Induction Heating in Food Processing and Cooking, Vol
.
9
, No.
2
,
82
–
90
(
2017
).
https://doi.org/10.1007/s12393-016-9156-0
Google Scholar
Crossref
Search ADS
 
27.
K.
 
Frogner
,
M.
 
Andersson
,
T.
 
Cedell
,
L.
 
Siesing
,
P.
 
Jeppsson
, and
J-E.
 
Ståhl
,
Proceedings of the 44th CIRP International Conference on Manufacturing Systems, Industrial heating using energy efficient induction technology
,
2011
.
28.
J.
 
Callebaut
,
Application note-induction heating
,
2014
.
Google Scholar
 
29.
S.
 
Mei
,
Q.
 
Wang
,
M.
 
Hao
,
J.
 
Xu
,
H.
 
Yin
,
H.
 
Xiao
,
C.
 
Feng
,
L.
 
Jiang
,
X.
 
Wang
,
F.
 
Liu
,
X.
 
Xu
, and
Z.
 
Wang
,
AIP advances, Theoretical analysis of induction heating in high-temperature epitaxial growth system
,
2018
.
Google Scholar
 
30.
A.
 
Pezzin
,
M.
 
Giansetti
, and
A.
 
Ferri
,
Proceedings of the 2013 COMSOL Conference in Rotterdam
,
Influence of Limescale on Heating Elements Efficiency
,
2013
.
31.
N.
 
Ersoy
,
L.
 
Wang
, and
G.
 
Shatil
,
A case study of the failure of an electric heater by thermal fatigue, Conference: Fatigue 2002 – Proceedings of the 8th International Fatigue
.
2002
32.
A.
 
Kajiyama
,
B.
 
Guo
 and
M.
 
Nakaoka
,
Proceedings of Power Conversion Conference - PCC ’97, Innovative development of electromagnetic induction-based Fluid-heating system using resonant PWM inverter
,
977
–
982
(
1997
).
This content is only available via PDF.
© 2021 Author(s).
2021
Author(s)
You do not currently have access to this content.