Cost and contamination with petroleum and diesel are driving vehicle produces to create vehicles energized by elective energies. Designers are working to make utilization of air as a source to run automotive. This work deals with Light utility vehicles which are ending up with exceptionally well-known methods for autonomous transportation. In this air-powered vehicle a pneumatic cylinder for continuous motion, and spur gears for transmission of motion and also a metallic chassis, pneumatic air compressor is used which is based on pneumatic power. This pneumatic cylinder gives a continuous linear motion which is converted into rotary motion. The vehicle consists of spur gears which transmits mechanical power from one place to another. There is a point of interest in utilizing compacted air as a wellspring of vitality to run vehicles. This approach simulates almost the same performance with existing cars driven by fuel in terms of parameters such as power, torque, efficiency.
Skip Nav Destination
Article navigation
16 February 2021
ADVANCED TRENDS IN MECHANICAL AND AEROSPACE ENGINEERING: ATMA-2019
7–9 November 2019
Bangalore, India
Research Article|
February 16 2021
Design model of air powered pneumatic car
Jnanakshi Snigdha;
Jnanakshi Snigdha
a)
Dayananda Sagar University, Department of Mechanical Engineering
, Bangalore, India
a)Corresponding author: [email protected]
Search for other works by this author on:
Chandrashekhar Telkar;
Chandrashekhar Telkar
Dayananda Sagar University, Department of Mechanical Engineering
, Bangalore, India
Search for other works by this author on:
Sanchita Jali;
Sanchita Jali
Dayananda Sagar University, Department of Mechanical Engineering
, Bangalore, India
Search for other works by this author on:
Saravana Bavan
Saravana Bavan
b)
Dayananda Sagar University, Department of Mechanical Engineering
, Bangalore, India
Search for other works by this author on:
a)Corresponding author: [email protected]
AIP Conf. Proc. 2316, 030010 (2021)
Citation
Jnanakshi Snigdha, Chandrashekhar Telkar, Sanchita Jali, Saravana Bavan; Design model of air powered pneumatic car. AIP Conf. Proc. 16 February 2021; 2316 (1): 030010. https://doi.org/10.1063/5.0038270
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
55
Views
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Related Content
Controllable pneumatic generator based on the catalytic decomposition of hydrogen peroxide
Rev. Sci. Instrum. (July 2014)
A variable stiffness method for pneumatic flexible arms
AIP Advances (August 2023)
A technical assessment of pneumatic conveying of solids for a high temperature particle receiver
AIP Conf. Proc. (July 2019)
Highly damped single-chamber pneumatic vibration isolator using effects of thermal conductivity in the air volume
J Acoust Soc Am (October 2022)
Review on Biocrude generated from plastic waste using Pyrolysis process
AIP Conf. Proc. (August 2023)