Super pliancy is a reasonable method for framing complex-molded structures. The strategy has the benefits of convey in uncommon formability and possibly giving great dimensional tolerance. Stir casting method was effectively used to prepare the AA6063/ SiCp composite and followed by rolling process was repeated until the sheet reduces to the required thickness of 2.5 mm. With the gas pressure forming the composites were tested for superplastic forming. Instantaneous change in heights were measured through LVDT (Linear Variable Differential Transformer). Gas pressure forming tests were conducted on various percentages of SiCp composites. The biaxial superplastic forming tests were conducted at various temperatures between 520°C to 600°C and pressures between 0.2 MPa to 0.7 MPa. At the temperature of 600°C and 0.7 MPa the cracks were formed and the components were deformed.

1.
S. Vijay
ananth
,
K.
Kalaichelvan
,
M.
Kumerason
:
effect of temperature in superplastic forming in al6063/sicp compos
.
Adv. Mater. Res.
,
538-541
,
1111
(
2012
).
2.
K.C.
Chan
,
G.Q.
Tong
:
high strain rate superplastic gas pressure forming of an al-4.4 cu-1.5mg/ 21sicw composite under variable strain rate paths
.
Mater. Sci. Eng. A
,
374
,
285
, (
2004
).
3.
S. Vijay
Ananth
,
K.
Kalaichelvan
,
A.
Rajadurai
:
optimization of superplastic forming of al6063/5%sicp composites using taguchi experimental design
.
Int. Rev. Mech. Eng.
,
6
(
6
),
1209
(
2012
).
4.
K.C.
Chan
,
G.Q.
Tong
:
deformation and cavitation behavior of a high strain rate superplastic al2009/20sicw composite
.
Mater. Lett.
44
,
39
(
2000
).
5.
S. Vijay
Ananth
,
K.
Kalaichelvan
,
A.
Rajadurai
:
effect of thermo cycling process in al6063/sicp composites
.
Euro. J. Sci. Res.
,
88
(
3
),
403
(
2012
).
6.
N.
Cappetti
,
L.
Garofalo
,
A.
Naddeo
,
M.
Nastasia
,
A.
Pellegrino
:
a method for setting variables in super plastic forming process
.
J. Achieve. Mater. Manuf. Eng.
38
(
2
),
187
(
2010
).
7.
S.C.
Vettivel
,
R.
Jegan
,
J.
Vignesh
,
S.
Suresh
:
surface characteristics and wear depth profile of the tin, tialn and alcrn coated stainless steel in dry sliding wear condition
.
Sur. Inter.
,
6
,
1
(
2017
).
8.
A.J.
Barnes
:
superplastic forming 40 years and still growing
.
J. Mater. Eng. Perform.
16
(
4
),
440
(
2007
).
9.
S.
Balasivandhaprabu
,
L.
Karunamoorthy
,
S.
Kathiresan
,
B.
Mohan
:
influence of stirring speed and stirring time on distribution of particles in cast metal matrix composite
.
J. Mater. Process. Tech.
,
171
,
268
(
2005
).
10.
S.
Suresh
,
N.
Shenbagavinayagamoorthi
,
S. C.
Vettivel
,
N.
Selvakumar
:
mechanical behavior and wear prediction of stir cast al-tib2 composites using response surface methodology
.
Mater. Des.
,
59
,
383
(
2014
).
11.
S. C.
Vettivel
,
N.
Selvakumar
,
P. V.
Ponraj
:
mechanical behaviour of sintered cu-5% w nano powder composite
.
Proc. Engg.
38
,
2874
(
2012
).
S.O.
Adeosun
,
S.A.
Balogun
, S.A,
O.I.
Sekunowo
,
M.A.
Usman
:
effects of heat treatment on strength and ductility of rolled and forged aluminum 6063 alloy
.
J. Miner. Mater. Character. Eng.
,
9
(
8
),
763
(
2010
).
12.
S.
Suresh
,
N.
Shenbagavinayagamoorthi
,
N.
Selvakumar
,
S. C.
Vettivel
:
tribological, tensile and hardness behavior of tib2 reinforced aluminium metal matrix composite
.
J. Bal. Tribol. Assoc.
,
20
,
380
(
2014
).
13.
Abdel-Wahab
,
Ei-Morsy
,
Ken-Ichimanabe
,
hisashinishimura: superplastic forming of az31 magnesium alloy sheet into a rectangular pan
.
Mater. Trans.
,
43
(
10
),
2443
(
2002
).
14.
V.
Jayaseelana
,
S.
Vijayananth
,
J. Francis
Xavierc
,
S. Ajith Arul
Daniel
,
Nallapaneni Manoj
Kumard
,
X.X.
Jiange
,
Experimental investigation on bi-axial superplastic forming characteristics of AA6063/SiCp with various percentages of SiCp under various temperatures and pressures
,
Results in Physics
, (
15
),(
2019
).
15.
R.
Arravind
,
M.
Saravanan
,
A.
Baradeswaran
,
S.C.
Vettivel
,
S.
Suresh
:
tribological and surface behavior of aa 6061/al2o3/nano graphite hybrid composite using stir casting
.
J. Bal. Tribol. Assoc.
,
22
(
3
),
2038
(
2016
).
16.
Rajasekaran
,
A.
, and
R.
Pugazhenthi
, “
Study of mechanical properties of stir casted Al7075/SiCp composites after thermomechanical treatment
”,
Materials Today: Proceedings
, (
2019
).
17.
Pugazhenthi
,
R.
,
S.
Sivaganesan
,
C.
Dhansekaran
, and
A.
Parthiban
, “
Morphological and Mechanical Characteristics of Hybrid Aluminium Matrix Composites
”,
International Journal of Vehicle Structures & Systems (IJVSS)
11
(
2
), (
2019
).
18.
Pugazhenthi
,
R.
,
D.
Sreeram
,
S.S. Vijay
Ananth
, and
A.
Devaraju
, “
Surface fracture analysis of stir casted AA 6063/TiC/Gr hybrid composites under different solidification rate
”,
Materials Today: Proceedings
(
2019
).
This content is only available via PDF.
You do not currently have access to this content.