In this experimental investigation mainly focused about tensile strength as well as tensile modulus of Fiber reinforced polyester by using Chicken feather fiber. For testing completed with different combination of chicken feather fiber mixed with neat polyester in three different weight percentages. These three different percentages of weight combinations created with four various fiber lengths in “mm”. In each combination specimens tests were conducted to identify the tensile strength and tensile modulus values for comparisons of specimens to identify the best combination.
REFERENCES
1.
B.
Murali
and D.
Chandramohan
, “Chemical treatment on hemp/polymer composites
,” Journal of Chemical and Pharmaceutical Research
6
, 419
–423
(2014
).2.
B.
Murali
, B. V.
Ramnath
, and D.
Chandramohan
, “Mechanical properties of boehmeria nivea reinforced polymer composite
,” Materials Today: Proceedings
16
, 883
–888
(2019
), international Conference on Advances in Materials, Manufacturing and Applied Sciences.3.
B.
Murali
, D. Chandra
Mohan
, S. Nagoor
Vali
, S.
Muthukumarasamy
, and A.
Mohan
, “Mechanical behavior of chemically treated jute/polymer composites
,” Carbon - Science and Technology
6
, 330
–335
(2014
).4.
D.
Chandramohan
and A. J. P.
Kumar
, “Experimental data on the properties of natural fiber particle reinforced polymer composite material
,” Data in Brief
13
, 460
–468
(2017
).5.
D.
Chandramohan
and A.
Senthilathiban
, “Effects of chemical treatment on jute fiber reinforced composites
,” International Journal of Applied Chemistry
10
, 153
–162
(2014
).6.
D.
Chandramohan
and B.
Murali
, “Machining of composites - a review
,” Academic Journal of Manufacturing Engineering
12
, 67
–71
(2014
).7.
D.
Chandramohan
and J.
Bharanichandar
, “Impact test on natural fiber reinforced polymer composite materials
,” Carbon - Science and Technology
5
, 314
–320
(2013
).8.
D.
Chandramohan
and J.
Bharanichandar
, “Natural fiber reinforced polymer composites for automobile accessories
,” American Journal of Environmental Sciences
9
, 494
–504
(2014
).9.
D.
Chandramohan
and K.
Marimuthu
, “Applications of natural fiber composites for replacement of orthopaedic alloys
,” InternationalConference on Nanoscience, Engineering and Technology (ICONSET 2011
), 137
–145
(2011
).10.
D.
Chandramohan
and K.
Marimuthu
, “Characterization of natural fibers and their application in bone grafting substitutes
.” Acta of bioengineering and biomechanics
131
, 77
–84
(2011
).11.
D.
Chandramohan
and L.
Ravikumar
, “Free vibrational analysis of cortical / hard cancellous bone by using of fea
,” Materials Today: Proceedings
16
, 744
–749
(2019
), international Conference on Advances in Materials, Manufacturing and Applied Sciences.12.
D.
Chandramohan
and S.
Rajesh
, “Increasing combusting resistance for hybrid composites
,” International Journal of Applied Engineering Research
9
, 6979
–6985
(2014
).13.
D.
Chandramohan
and S.
Rajesh
, “Study of machining parameters on natural fiber particle reinforced polymer composite material
,” Academic Journal of Manufacturing Engineering
12
, 72
–77
(2014
).14.
D.
Chandramohan
, B.
Murali
, P.
Vasantha-Srinivasan
, and S. D.
Kumar
, “Mechanical, moisture absorption, and abrasion resistance properties of bamboo–jute–glass fiber composites
,” Journal of Bio- and Tribo-Corrosion
5
(2019
).15.
D.
Chandramohan
, J.
Bharanichandar
, P.
Karthikeyan
, R.
Vijayan
, and B.
Murali
, “Progress of biomaterials in the field of orthopaedics
,” American Journal of Applied Sciences
11
, 623
–630
(2014
).16.
D.
Chandramohan
and K.
Marimuthu
, “Natural fibre particle reinforced composite material for bone implant
,” European Journal of Scientific Research
54
, 384
–406
(2011
).17.
K.
Gurusami
, D.
Chandramohan
, S. Dinesh
Kumar
, M.
Dhanashekar
, and T.
Sathish
. “Strengthening mechanism of Nd: Yag laser shock peening for commercially pure titanium (CP-TI) on surface integrity and residual stresses
,” Materials Today: Proceedings
(2019
), 18.
K.
Gurusami
, K. Shanmuga
Sundaram
, D.
Chandramohan
, S. Dinesh
Kumar
, P. Vasantha
Srinivasan
, and T.
Sathish
. "A comparative study on surface strengthening characterisation and residual stresses of dental alloys using laser shock peening
." International Journal of Ambient Energy
0
, 1
–6
(2019
).19.
Arunkumar
, M.
, V.
Dhinakaran
, and N. Siva
Shanmugam
. "Numerical prediction of temperature distribution and residual stresses on plasma arc welded thin titanium sheets
." International Journal of Modelling and Simulation
(2019
): 1
–17
.20.
M. D.
Vijayakumar
, D.
Chandramohan
and G.
Gopalaramasubramaniyan
, “Experimental investigation on single point incremental forming of IS513Cr3 using response surface method
,” Materials Today: Proceedings
(2019
), 21.
M.
Dhanashekar
, P.
Loganathan
, S.
Ayyanar
, S.
Mohan
, and T.
Sathish
, “Mechanical and wear behaviour of aa6061/sic composites fabricated by powder metallurgy method
,” Materials Today: Proceedings
(2019
), .22.
P.V.
Srinivasan
, S.
Karthi
, M.
Chellappandian
, A.
Ponsankar
, A.
Thanigaivel
, S.
Senthil-Nathan
, D.
Chandramohan
, and R.
Ganesan
. “Aspergillus flavus (Link) toxins reduces the fitness of dengue vector Aedes aegypti (Linn.) and their non-target toxicity against aquatic predator
.” Microbial pathogenesis
128
, 281
–287
(2019
).23.
R. P.
Kumar
, P.
Periyasamy
, S.
Rangarajan
, and T.
Sathish
, “Comparison of mechanical and tribological behaviour of magnesium in composition with various metal
,” International Journal of Recent Technology and Engineering
8
, 947
–950
(2019
).24.
S. Dinesh
Kumar
, D.
Chandramohan
, K.
Purushothaman
and T.
Sathish
, “Optimal Hydraulic And Thermal Constrain For Plate Heat Exchanger Using Multi Objective Wale Optimization
”, Materials Today Proceedings
(2019
), .25.
Dhinakaran
, V.
, N. Siva
Shanmugam
, and K.
Sankaranarayanasamy
. "Experimental investigation and numerical simulation of weld bead geometry and temperature distribution during plasma arc welding of thin Ti-6Al-4V sheets
." The Journal of Strain Analysis for Engineering Design
52
, no. 1
(2017
): 30
–44
.26.
S.
Palaniappan
, K.
Muthukumar
, R.
Sabariraj
, S. D.
Kumar
, and T.
Sathish
, “Cnc turning process parameters optimization on aluminium 6082 alloy by using taguchi and anova
,” Materials Today: Proceedings
(2019
), .27.
S.D.
Kumar
, K.
Purushothaman
, D.
Chandramohan
, M. Mohinish
Dushyantraj
, and T.
Sathish
. “ANN-AGCS for the prediction of temperature distribution and required energy in hot forging process using finite element analysis
,” Materials Today: Proceedings
(2019
), 28.
T.
Adithiyaa
, D.
Chandramohan
, and T.
Sathish
, “Flower pollination algorithm for the optimization of stair casting parameter for the preparation of amc
,” Materials Today: Proceedings
(2019
), .29.
T.
Adithiyaa
, D.
Chandramohan
, and T.
Sathish
, “Optimal prediction of process parameters by gwo-knn in stirring-squeeze casting of aa2219 reinforced metal matrix composites
,” Materials Today: Proceedings
(2019
), .30.
T.
Sathish
, “A review on mechanical and tribological behaviour of aluminium based metal matrix composites
,” International Journal of Mechanical and Production Engineering Research and Development
, 473
–478
(2018
).31.
T.
Sathish
, “Fluid flow analysis of composite material-based wind turbine blades using ansys
,” International Journal of Ambient Energy
0
, 1
–4
(2019
), .32.
T.
Sathish
, and D.
Chandramohan
, “Teaching methods and methodologies used in laboratories
,” International Journal of Recent Technology and Engineering
7
, 291
–293
(2019
).33.
T.
Sathish
, D.
Chandramohan
, “Design and analysis of wind box segment in travelling grate stoker boiler using CFD
,” International Journal of Recent Technology and Engineering
7
, 287
–290
(2019
).34.
T.
Sathish
, D.
Chandramohan
, “Experimental study and model development for on-line drill wear monitoring system using lab view
,” International Journal of Recent Technology and Engineering
7
, 281
–286
(2019
).35.
T.
Sathish
, D. K.
Singaravelu
, D.
Chandramohan
, V.
Venkatraman
, and V.
Rathinavelu
, “Tlonn for the effective prediction of heat transfer rates in tube heat exchangers
,” Thermal Science
(2019
), pp. 438
–438
, .36.
T.
Sathish
, P.
Periyasamy
, D.
Chandramohan
, N.
Nagabhooshanam
, “Modelling of cost based optimization system E-O-L disassembly in reverse logistics
,” International Journal of Mechanical and Production Engineering Research and Development
2018
, 711
–716
(2018
).37.
T.
Sathish
, P.
Periyasamy
, D.
Chandramohan
, N.
Nagabhooshanam
, “Modelling K-nearest neighbour technique for the parameter prediction of cryogenic treated tool in surface roughness minimization
,” International Journal of Mechanical and Production Engineering Research and Development
2018
, 705
–710
(2018
).38.
T.
Sathish
, S.
Saravanan
, and V.
Vijayan
, “Effect of reinforced aluminium alloy lm30 with pure ceramic particles to evaluate hardness and wear properties
,” Materials Research Innovations
0
, 1
–4
(2019
), .39.
V.
Mohanavel
, M.
Ravichandran
, T.
Sathish
, S. Suresh
Kumar
, M.
Ravikumar
, S.
Mahendiran
, and L. Yeshwanth
Nathan
, “Tribological and mechanical behaviour of composites fabricated via compo casting, stir casting and situ casting–an overview
,” Journal of Balkan Tribological Association
25
, 342
–352
(2019
)40.
V.
Pandyaraj
, L. Ravi
Kumar
, and D.
Chandramohan
, “Experimental investigation of mechanical properties of gfrp reinforced with coir and flax
,” International Journal of Mechanical Engineering and Technology
9
, 1034
–1042
(2018
).
This content is only available via PDF.
© 2020 Author(s).
2020
Author(s)
You do not currently have access to this content.
