Machining dust particles inside engine components result in decrease life time and increased wear and tear of other components. It is very essential to clean all machined parts before assembly to ensure better and longer functioning of all components. The project focus on deburring the crankshaft oil passage hole to a certain amount making sure no part engine of the engine is damaged. This process is carried step by step from analysing the cause to find a end result for the same. By making a minor design change in the nozzle of crankshaft washing machine.

Topics
Crankshafts, Machining
1.
P.
 
Comley
,
I.
 
Walton
,
T.
 
Jin
, and
D.
 
Stephenson
, “
A high material removal rate grinding process for the production of automotive crankshafts
,”
CIRP annals
 
55
,
347
–
350
(
2006
).
https://doi.org/10.1016/S0007-8506(07)60432-6
Google Scholar
Crossref
Search ADS
 
2.
M.
 
Carlsson
,
R.
 
Ask
,
N.
 
Sandgren
,
S.
 
Jakobsson
,
F.
 
Edelvik
, and
L.
 
Hanson
, “
Simulation of high-pressure washing of engine blocks
,”
Procedia CIRP
 
72
,
416
–
419
(
2018
).
https://doi.org/10.1016/j.procir.2018.03.225
Google Scholar
Crossref
Search ADS
 
3.
Y.
 
Lei
,
J.
 
Liu
,
T.
 
Qiu
,
Y.
 
Li
,
Y.
 
Wang
,
B.
 
Wan
, and
X.
 
Liu
, “
Gas jet flow characteristic of high-pressure methane pulsed injection of single-hole cylindrical nozzle
,”
Fuel
 
257
,
116081
(
2019
).
https://doi.org/10.1016/j.fuel.2019.116081
Google Scholar
Crossref
Search ADS
 
4.
G.
 
Mucchetti
,
B.
 
Bonvini
,
S.
 
Francolino
,
E.
 
Neviani
, and
D.
 
Carminati
, “
Effect of washing with a high pressure water spray on removal of listeria innocua from gorgonzola cheese rind
,”
Food Control
 
19
,
521
–
525
(
2008
).
https://doi.org/10.1016/j.foodcont.2007.06.003
Google Scholar
Crossref
Search ADS
 
5.
E.
 
Tahmasebi
,
P.
 
Albertelli
,
T.
 
Lucchini
,
M.
 
Monno
, and
V.
 
Mussi
, “
Cfd and experimental analysis of the coolant flow in cryogenic milling
,”
International Journal of Machine Tools and Manufacture
 
140
,
20
–
33
(
2019
).
https://doi.org/10.1016/j.ijmachtools.2019.02.003
Google Scholar
Crossref
Search ADS
 
6.
J. F. G. d.
 
Oliveira
,
E. J. d.
 
Silva
,
C.
 
Guo
, and
F.
 
Hashimoto
, “
Industrial challenges in grinding
,”
CIRP annals
 
58
,
663
–
680
(
2009
).
https://doi.org/10.1016/j.cirp.2009.09.006
Google Scholar
Crossref
Search ADS
 
7.
M.
 
Vashista
,
S.
 
Kumar
,
A.
 
Ghosh
, and
S.
 
Paul
, “
Surface integrity in grinding medium carbon steel with miniature electroplated monolayer cbn wheel
,”
Journal of Materials Engineering and Performance
 
19
,
1248
–
1255
(
2010
).
https://doi.org/10.1007/s11665-010-9626-0
Google Scholar
Crossref
Search ADS
 
8.
R.
 
Drazumeric
,
J.
 
Badger
, and
P.
 
Krajnik
, “
Geometric, kinematical and thermal analyses of non-round cylindrical grinding
,”
Journal of Materials Processing Technology
 
214
,
818
–
827
(
2014
).
https://doi.org/10.1016/j.jmatprotec.2013.12.007
Google Scholar
Crossref
Search ADS
 
9.
K.
 
Mekala
,
J.
 
Chandradas
,
K.
 
Chandrasekaran
,
T.
 
Kannan
,
E.
 
Ramesh
, and
R. N.
 
Babu
, “
Optimization of cylindrical grinding parameters of austenitic stainless steel rods (aisi 316) by taguchi method
,”
International Journal of Mechanical Engineering and Robotics Research
 
3
,
208
(
2014
).
Google Scholar
 
10.
A.
 
Adebayo
, “
Characterisation of integrated waam and machining processes
,” (
2013
).
Google Scholar
 
11.
M.
 
Vashista
,
A.
 
Gaddam
, and
S.
 
Paul
, “
Study of surface integrity of ground bearing steel using barkhausen noise technique
,”
The International Journal of Advanced Manufacturing Technology
 
63
,
771
–
783
(
2012
).
https://doi.org/10.1007/s00170-012-3918-5
Google Scholar
Crossref
Search ADS
 
12.
A.
 
Walsh
,
B.
 
Baliga
, and
P. D.
 
Hodgson
, “A study of the crankshaft pin grinding forces,” in
Key Engineering Materials
, Vol.
257
(
Trans Tech Publ
,
2004
) pp.
75
–
80
.
Google Scholar
 
This content is only available via PDF.
© 2020 Author(s).
2020
Author(s)
You do not currently have access to this content.