Vocational school is an educational institution provide practice study times more than theory. Manual garment pattern workshop is one of the major workshops where students learn drawing skills in garment patterns with manual technic in Textile and Garment School, Indonesia. The observation shows that the drawing table is the main facility in the workshop because of almost 6 hours a day in 2-3 weeks, students do activities in there for 3 semesters. The aim of this study is to conduct an ergonomic evaluation of the table facilities for making the manual garment patterns in the workshop. This is necessary because students often sit hunched up and reach beyond the reach of their hands. Bad learning positions for a long time and repeatedly can cause injury to students. The methods used in this study are the Nordic Body Map questionnaire to assess the respondent’s pain, anthropometric to check the facilities dimensional, and garment size standards based on the Indonesian National Standard (SNI) to check the suitability of a wide area of the facilities. To the best of our knowledge, in Indonesia, there are no published studies specific about evaluated the manual pattern garment workshop, so it the reasons for presenting in this research.

1.
Hill
,
Julia J.
and
Keating
,
Jennifer L.
Risk Factors for the first episode of low back pain in dhildren are infrequently validated across samples and condition: a systematic review
Journal of Physiotherapy
, vol.
56
,
2010
, pp.
237
244
.
2.
Balague
F
,
Troussier
B
,
Salminen
JJ
. “
Non-Specific low back pain in children and adolescents: risk factor
”.
European Spine Journal
, vol.
8
,
1999
, pp.
429
438
.
3.
Tarwaka
SHB
and
Lilik
Sudiajeng
, “Ergonomics for Health and Safety Work and Productivity”
UNIBA Press
.
Surakarta
,
2004
.
4.
Education and Training Center of Ministry of Industry
, “Academic Guidelines for Textile and Garment Academies”
Jakarta
,
2015
.
5.
Sutalaksana
,
Iftikar Z.
and
Widyanti
,
Ari
, “
Antrhropometry approach in workplace redesign in indonesian Sundanese roof tile industries
Internatonal Journal of Industrial Ergonomics
, vol.
53
,
2016
, pp.
299
305
.
6.
Widyanti
,
Ari.
,
Susanti
,
Lusi.
,
Sutalaksana
,
Iftikar Z.
, and
Muslim
,
Khoirul
, “
Ethnic differences in Indonesian anthropometry data: Evidence from three different largest ethnics
”.
Internatonal Journal of Industrial Ergonomics
, vol.
47
,
2015
, pp.
72
78
.
7.
Mark R.
Lehto
,
James R.
Buck
. “Introduction To Human Factors and Ergonomics for Engineers. Human Factors and Ergonomics”. New York,
2008
,
United State of America
.
8.
Sutari
,
Winoyo.
,
Yekti
,
Yusuf N. D.
,
Astuti
.
Murni D.
,
Sari
,
Yuvie M.
, “
Analysis of working posture on musular skeletondisorder of operator in stamp scraping in ‘batik cap’ industry
”.
Procedia Manufacturing
, vol.
4
,
2015
, pp.
133
138
.
9.
Kim
,
Dongmin S.J.
,
Hallbeck
,
M. Susan.
,
Haight
,
Joel M.
,
Jung
,
Myung-Chul
. “
ErgonomicHand Tool and Desk and Chair Development Process
”.
Int. Journal of Occupational Safety and Ergonomics
, vol.
14
,
2008
, pp.
247
252
.
10.
Katada.co.id
Javaness dominate 40% Indonesian Ethnics
”. https://databoks.katadata.co.id/datapublish/2018/10/29/jawamendisi-40-persen-suku-bangsa-di-indonesia accessed November 15,
2018
.
11.
Hassaine
,
M.
,
Hamaoui
,
A.
,
Zanone
,
P.-G.
, “
Effect of table sop slope and height on body posture and muscular activity pattern
Annal of Physical and Rehabilitation Medicine
, Vo.
58
,
2015
, pp.
86
91
.
12.
Tarwaka
, “Basic Ergonomic and Aplication in Workplace”
Surakarta
,
2013
.
13.
Sari
,
Amarrila Dila
.,
Anwar
,
Annisa Rahmadani
,
Suryoputro
,
M Ragil
., “
Work Potural Analysis and muscoluskeletal inury risk in critical working station at XYZ Ceramics Yogyakarta
”.
MATECS Web Conferences
,
154
,
2018
..
14.
Nurmianto
,
E
, “Basic Concept of Ergonomics and Aplication”.
PT. Graha Ilmu
,
Surabaya
,
2013
.
15.
Fuchry
,
M.
, “Manual Pattern Garment II Module”,
Pusdiklat Industry
,
Jakarta
,
2015
.
16.
Bridger
,
RS.
, “Introduction to Ergonomics. 2nd Edition”,
Taylor & Francis Inc
,
London
,
2003
.
17.
SNI 3539:2010
“Ukuran Kemeja Pria Dewasa”.
Badan Standarisasi Nasional
.
18.
SNI 0361:2013
“Ukuran Celana Panjang Pria Dewasa”
Badan Standarisasi Nasional
.
This content is only available via PDF.
You do not currently have access to this content.