The paper presents the results of tests of thermal properties of heavy-weight concrete designed to be used in the manufacturing of small prefabricated masonry elements that can be used in the construction of demountable shielding structures. The specificity of the tested concrete is the use of waste copper slag as fine aggregate instead of sand. The results obtained in the case of two concrete variants (one with basalt magnetite aggregate and the other with barite aggregate) were compared with reference concrete made also in two variants (differing in the type of fine aggregate). The obtained results showed that the use of waste copper slag in shielding concrete significantly reduces the values of its thermal conductivity and specific heat and to a lesser extent also its thermal diffusivity and thermal volume capacity.
Skip Nav Destination
Article navigation
27 February 2020
SPECIAL CONCRETE AND COMPOSITES 2019: 16th International Conference
16–17 October 2019
Lisek, Czech Republic
Research Article|
February 27 2020
Thermal properties of heavy concrete for small pre-cast shielding elements
Roman Jaskulski;
Roman Jaskulski
a)
1
Warsaw University of technology
, 17 Łukasiewicza Str., 09-402 Płock, Poland
a)Corresponding author: Roman.Jaskulski@pw.edu.pl
Search for other works by this author on:
Wojciech Kubissa;
Wojciech Kubissa
b)
1
Warsaw University of technology
, 17 Łukasiewicza Str., 09-402 Płock, Poland
Search for other works by this author on:
Pavel Reiterman;
Pavel Reiterman
c)
2
Czech Technical University in Prague, University Centre for Energy Efficient Buildings
, Trinecka 1024, 273 43 Bustehrad, Czech Republic
Search for other works by this author on:
Ondřej Holčapek
Ondřej Holčapek
d)
2
Czech Technical University in Prague, University Centre for Energy Efficient Buildings
, Trinecka 1024, 273 43 Bustehrad, Czech Republic
Search for other works by this author on:
AIP Conf. Proc. 2210, 020011 (2020)
Citation
Roman Jaskulski, Wojciech Kubissa, Pavel Reiterman, Ondřej Holčapek; Thermal properties of heavy concrete for small pre-cast shielding elements. AIP Conf. Proc. 27 February 2020; 2210 (1): 020011. https://doi.org/10.1063/5.0000358
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Pay-Per-View Access
$40.00
Citing articles via
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Production and characterization of corncob biochar for agricultural use
Praphatsorn Rattanaphaiboon, Nigran Homdoung, et al.
Related Content
Influence of surface water absorption on deicer salt scaling resistance
AIP Conf. Proc. (July 2019)
Application of imaging techniques and image analysis to concrete samples
AIP Conference Proceedings (February 2021)
Using and optimizing the recycled aggregates in concrete: A review
AIP Conf. Proc. (December 2023)