The experiment aims to study the tribological properties of PTFE composite with graphite filler as additive. The specimens are prepared with the concept of Powder metallurgy, varying the percentage of additive material. Four different specimens with variation in percentage of additive is prepared for the purpose of experimentation. The technique of taguchi orthogonal array is involved in design of experiments. Tribological tests were conducted by varying the load and Disc speed while sliding distance was maintained constant. Pin on Disc tribometer was employed to conduct the wear tests. The effect of filler content, load, wear on its tribological properties was observed in this study through ANOVA. Experimentation on specimens reveal that 24% graphite added to PTFE composite had less susceptibility to wear. The most influencing input parameter on tribological properties are observed to be filler content.
Skip Nav Destination
,
,
,
Article navigation
3 September 2019
1ST INTERNATIONAL CONFERENCE ON ADVANCES IN MECHANICAL ENGINEERING AND NANOTECHNOLOGY (ICAMEN 2019)
8–9 March 2019
Jaipur, India
Research Article|
September 03 2019
Experimental investigation on tribological properties of PTFE based composite
P. Santhosh Kumar;
P. Santhosh Kumar
Department of Mechanical Engineering, Amrita School of Engineering
, Bengaluru Amrita Vishwa Vidyapeetham, India
Search for other works by this author on:
Madhu Surya Vinayak;
Madhu Surya Vinayak
Department of Mechanical Engineering, Amrita School of Engineering
, Bengaluru Amrita Vishwa Vidyapeetham, India
Search for other works by this author on:
V. N. Vaishak;
V. N. Vaishak
Department of Mechanical Engineering, Amrita School of Engineering
, Bengaluru Amrita Vishwa Vidyapeetham, India
Search for other works by this author on:
Y. P. Deepthi
Y. P. Deepthi
a)
Department of Mechanical Engineering, Amrita School of Engineering
, Bengaluru Amrita Vishwa Vidyapeetham, India
a)Corresponding author: [email protected]
Search for other works by this author on:
P. Santhosh Kumar
Madhu Surya Vinayak
V. N. Vaishak
Y. P. Deepthi
a)
Department of Mechanical Engineering, Amrita School of Engineering
, Bengaluru Amrita Vishwa Vidyapeetham, India
a)Corresponding author: [email protected]
AIP Conf. Proc. 2148, 030023 (2019)
Citation
P. Santhosh Kumar, Madhu Surya Vinayak, V. N. Vaishak, Y. P. Deepthi; Experimental investigation on tribological properties of PTFE based composite. AIP Conf. Proc. 3 September 2019; 2148 (1): 030023. https://doi.org/10.1063/1.5123945
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Related Content
Experimental investigation on influence of molybdenum content on tribological properties of hybrid PTFE composite
AIP Conf. Proc. (March 2019)
Study on tribological behavior of composite laminated material of monoaxial stretched PTFE film
AIP Conf. Proc. (January 2017)
Wear behavior of (Al/PTFE) functionally graded materials for bearing application
AIP Conf. Proc. (March 2025)
Tribological behavior of Nano-Al2O3 and PEEK reinforced PTFE composites
AIP Conf. Proc. (January 2017)