Firing process of kaolinite-illite ceramic mixtures was studied. High purity illitic and kaolinitic clays were mixed in ratios 1:9, 3:7, 5:5, 7:3, and 9:1. The prepared samples were linearly heated from room temperature up to 1100 °C and down to the room temperature at the heating rate of 5 °C/min. Firing process was studied by thermodilatometry, thermogravimetry, development of bulk density and dynamic Young’s modulus. The final values of Young’s modulus increased linearly with increasing illite content. A more complicated relationship was observed by thermodilatometry. The best ratio between firing shrinkage and final value of Young’s modulus was found for the mixture 5:5.
REFERENCES
1.
A. F.
Gualtieri
et al., J. Appl. Crystallogr.
41
, 402
–415
(2008
).2.
S.
Ferrari
and A.F.
Gualtieri
, Appl. Clay Sci.
32
, 73
–81
(2006
).3.
A.
Aras
, Appl. Clay Sci.
24
, 257
–269
(2004
).4.
E.
Escalera
et al., IOP Conf. Ser. Mater. Sci. Eng.
31
, 012017
(2012
).5.
F. H.
Norton
, Fine Ceramics - Technology and Applications
(Mcgraw-Hill
, New York
, 1970
).6.
V.
Hanykýř
and J.
Kutzendorfer
, Technology of Ceramics
, (Silicate society
, Prague
, 2008
). (in Czech)7.
B.
Číčel
et al., Mineralogy and Crystallochemistry of Clays
(VEDA
, Bratislava
, 1981
). (in Slovak)8.
F.
Chmelík
et al., J. Eur. Ceram. Soc.
31
, 2205
–2209
(2011
).9.
M.
Knapek
et al., J. Eur. Ceram. Soc.
36
, 221
–226
(2016
).10.
T.
Ondro
and A.
Trník
, “Non-isothermal kinetic analysis of processes occuring during thermal treatment of kaolinite
”, in Thermophysics 2017
, AIP Conference Proceedings
1866
, edited by A.
Trnik
et al. (American Institute of Physics
, Mellville, NY
, 2017
), article number 040028.11.
T.
Ondro
and A.
Trník
, “Kinetic behaviour of thermal transformations of kaolinite
”, in Thermophysics 2018
, AIP Conference Proceedings
1988
, edited by A.
Trnik
et al. (American Institute of Physics
, Mellville, NY
, 2018
), article number 020033.12.
K.
Galos
, Ceram. Int.
37
, 851
–861
(2011
).13.
D.
Magagnin
et al., Mater. Sci. Eng. A
618
, 533
–539
(2014
).14.
O.
Sivrikaya
et al., Appl. Clay Sci.
135
, 532
–537
(2017
).15.
E.
Escalera
et al., Appl. Clay Sci.
101
, 100
–105
(2014
).16.
R.
Podoba
et al., Építőanyag
64
, 28
–29
(2012
).17.
M.
Jankula
et al., Építőanyag
65
, 11
–14
(2013
).18.
19.
I.
Štubňa
et al., Acta Acust. United with Acust.
104
, 269
–276
(2018
).20.
ASTM Standard 1259-01
, Standard Test Method for Dynamic Young’s Modulus, Shear Modulus, and Poisson’s Ratio for Advanced Ceramics by Impulse Excitation of Vibration
(ASTM International
, Philadelphia, USA
, 2001
).21.
C. Y.
Chen
et al., Ceram. Int.
26
, 715
–720
(2000
).22.
B.
Sonuparlak
et al., J. Am. Ceram. Soc.
70
, 837
–842
(1987
).
This content is only available via PDF.
© 2019 Author(s).
2019
Author(s)
You do not currently have access to this content.