The aluminium and its alloys welding has continually shown a good task for designers and technologists. Specifically heat-treatable aluminium alloys, are tough to merge by fusion fastening methods. The method was established primarily for aluminium alloys, meanwhile Friction Stir Welding (FSW) was established which is appropriate for merging huge number of materials. Through FSW, the process parameters like the travel Speed (mm/min), Rotation Speed (Rpm), Titling Angle and Bottom tool Diameter (mm) at the sample interface which prominently effects in the Mechanical quality such as Yield Strength - YS (Mpa), Tensile Strength – TS (Mpa), - YM (GPa) Elongation - E (%) & Young’s Modulus of weld. The objective of the current work is to study these parameters when develop a weld of Dissimilar alloys, were shaped by VMC. For detailed study of these parameters, With L9 orthogonal array, trails were conducted. Grey relational Analysis analyse the mechanical quality of the output parameter.
Skip Nav Destination
,
,
,
,
Article navigation
31 October 2018
INTERNATIONAL CONFERENCE ON INVENTIVE MATERIAL SCIENCE APPLICATIONS: ICIMA-2018
27–28 September 2018
Tamil Nadu, India
Research Article|
October 31 2018
Multi-attribute decision making parametric optimization and modelling in friction stir welding through grey relation taguchi analysis and ANOVA: A case study Available to Purchase
S. Rajendrakumar;
S. Rajendrakumar
a)
1
Department of Mechanical Engineering, SRM Institute of Science and Technology
, Kancheepuram District, Kattankulathur-603203, Tamil Nadu, India
a)Corresponding author: [email protected]
Search for other works by this author on:
S. P. Sundar Singh Sivam;
S. P. Sundar Singh Sivam
b)
1
Department of Mechanical Engineering, SRM Institute of Science and Technology
, Kancheepuram District, Kattankulathur-603203, Tamil Nadu, India
Search for other works by this author on:
K. Saravanan;
K. Saravanan
2
Department of Mechatronics Engineering, SRM Institute of Science and Technology
, Kancheepuram District, Kattankulathur-603203, Tamil Nadu, India
Search for other works by this author on:
K. Sathiya Moorthy;
K. Sathiya Moorthy
1
Department of Mechanical Engineering, SRM Institute of Science and Technology
, Kancheepuram District, Kattankulathur-603203, Tamil Nadu, India
Search for other works by this author on:
D. Kumaran
D. Kumaran
1
Department of Mechanical Engineering, SRM Institute of Science and Technology
, Kancheepuram District, Kattankulathur-603203, Tamil Nadu, India
Search for other works by this author on:
S. Rajendrakumar
1,a)
S. P. Sundar Singh Sivam
1,b)
K. Saravanan
2
K. Sathiya Moorthy
1
D. Kumaran
1
1
Department of Mechanical Engineering, SRM Institute of Science and Technology
, Kancheepuram District, Kattankulathur-603203, Tamil Nadu, India
2
Department of Mechatronics Engineering, SRM Institute of Science and Technology
, Kancheepuram District, Kattankulathur-603203, Tamil Nadu, India
a)Corresponding author: [email protected]
AIP Conf. Proc. 2034, 020005 (2018)
Citation
S. Rajendrakumar, S. P. Sundar Singh Sivam, K. Saravanan, K. Sathiya Moorthy, D. Kumaran; Multi-attribute decision making parametric optimization and modelling in friction stir welding through grey relation taguchi analysis and ANOVA: A case study. AIP Conf. Proc. 31 October 2018; 2034 (1): 020005. https://doi.org/10.1063/1.5067348
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Social mediated crisis communication model: A solution for social media crisis?
S. N. A. Hamid, N. Ahmad, et al.
Related Content
Effect of tool pin profile on friction stir welding of AA5083 aluminum alloy
AIP Conf. Proc. (November 2020)
Design, fabrication and analysis of linear clamping fixture for friction stir spot welding
AIP Conf. Proc. (May 2023)
Study and optimize Fsw parametric effect on hardness of weld joints by Taguchi & ANOVA
AIP Conf. Proc. (February 2023)
Study and optimize the mag parametric influence on impact strength of Aa6061 joint by Taguchi and ANOVA
AIP Conf. Proc. (February 2023)
Optimizing the machining conditions on friction stir welding of aluminum alloy through design experiments
AIP Conf. Proc. (December 2019)