This paper is aimed to design and construct the home-made temperature monitoring system from four-channel K-type thermocouples in order to improve the temperature measurement based on standard evaluation measurements guidance. The temperature monitoring system was capable to record the temperature on SD card and to display the realtime temperature on Internet of Thing Technology platform. The temperature monitoring system was tested in terms of the temperature measurement accuracy and delay response time. It was found that a standard deviation was acceptable as compared to the Instrument Society of America. The response time of the microcontroller to SD card was 2 sec faster than that of the microcontroller to Thingspeak.
REFERENCES
1.
K.
Saenyot
, K.
Locharoenrat
, S.
Lekchaum
, Appl. Mech. Mater.
851
, 383
–388
(2016
).2.
S.
Lekchaum
, K.
Locharoenrat
, Appl. Mech. Mater.
835
, 731
–735
(2016
).3.
H. H.
Shaker
, A. A.
Saleh
, A. H.
Ali
, M. A.
Elaziz
, “Self-calibrating enabled low cost, two channel type K thermocouple interface for microcontrollers
,” (Proc. ICM
, 2016
), pp. 309
–312
.4.
F.
Arnold
, I.
Demallie
, L.
Florence
, D. O.
Kashinski
, Rev. Sci. Instrum.
86
, 035112
(2015
).5.
M. S.
Chavan
, V. S.
Suryawanshi
, S. S.
Sankpal
, Int. J. Adv. Res. Comp. Sci. & Mgt. Stud.
2
, 51
–57
(2014
).6.
P. R.
Dandekar
, S. V.
Gumaste
, P. D.
Dahiwale
, “Temperature controlling and data logging using embedded system
,” (Proc. ICWET, 2010
), pp. 940
–945
.7.
P.
Thota
and Y.
Kim
, “Implementation and Comparison of M2M Protocols for Internet of Things
,” (Proc. ACIT-CSII-BCD
, 2016
), pp. 43
–48
.8.
S. M.
Kim
, H. S.
Choi
, W. S.
Rhee
, “IoT home gateway for auto-configuration and management of MQTT devices
,” (Proc. ICWiSe
, 2015
), pp. 12
–20
.9.
ASTM committee
: Manual on the Use of Thermocouples in Temperature Measurement, ASTM International
, New York
, 1993
.
This content is only available via PDF.
© 2018 Author(s).
2018
Author(s)
You do not currently have access to this content.
