The production of graphene reinforced aluminum matrix composite through powder metallurgical route requires optimization of process parameters to obtain better performance characteristics. One of the advanced method available for statistical analysis of parameters is Response Surface Methodology (RSM). The statistical analysis was carried out with three parameters, weight percentage of graphene reinforcement Wg (0.05%, 0.1% and 0.2%), stirring time ST(1h, 2h and 3h) and compaction pressure Pc(16T, 17T and 19T) while sintering temperature T kept constant. The performance of the Box Behnken design was analyzed and optimized using Design Expert software for the effective production of composites. From the results obtained from the analysis, the best set of parameters were considered for the future production of composites.
Skip Nav Destination
Article navigation
16 October 2017
PROCEEDINGS OF THE 20TH INTERNATIONAL ESAFORM CONFERENCE ON MATERIAL FORMING: ESAFORM 2017
26–28 April 2017
Dublin, Ireland
Research Article|
October 16 2017
Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design
Bhagya Lakshmi Dasari;
Bhagya Lakshmi Dasari
a)
1
Department of Mechanical Engineering & Aeronautics, City, University of London
, London, UK
Search for other works by this author on:
Jamshid M. Nouri;
Jamshid M. Nouri
b)
1
Department of Mechanical Engineering & Aeronautics, City, University of London
, London, UK
Search for other works by this author on:
Dermot Brabazon;
Dermot Brabazon
c)
2
Advanced Processing Technology Research Center, School of Mechanical and Manufacturing Engineering, Dublin City University
, Dublin 9, Ireland
Search for other works by this author on:
Sumsun Naher
Sumsun Naher
d)
1
Department of Mechanical Engineering & Aeronautics, City, University of London
, London, UK
Search for other works by this author on:
a)
Corresponding author: bhagya.dasari@city.ac.uk
AIP Conf. Proc. 1896, 130006 (2017)
Citation
Bhagya Lakshmi Dasari, Jamshid M. Nouri, Dermot Brabazon, Sumsun Naher; Parametric study for graphene reinforced aluminum matrix composites production using Box Behnken design. AIP Conf. Proc. 16 October 2017; 1896 (1): 130006. https://doi.org/10.1063/1.5008155
Download citation file:
Sign in
Don't already have an account? Register
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Pay-Per-View Access
$40.00
37
Views
Citing articles via
The effect of a balanced diet on improving the quality of life in malignant neoplasms
Yu. N. Melikova, A. S. Kuryndina, et al.
Animal intrusion detection system using Mask RCNN
C. Vijayakumaran, Dakshata, et al.
Recognition of cat ras of face and body using convolutional neural networks
Akhmad Wahyu Aji, Esmeralda Contessa Djamal, et al.
Related Content
Doping optimization of polypyrrole with toluenesulfonic acid using Box-Behnken design
AIP Conf. Proc. (November 2013)
Optimization of extraction of lemongrass leaves (Cymhopogon citratus) with microwave-assisted hydrodistillation using Box-Behnken design
AIP Conf. Proc. (September 2021)
Experimental investigation on mechanical properties of hybrid protein fiber composites and its optimization using Box Behnken experimental design
AIP Conf. Proc. (November 2022)
Box Behnken design of experiments for investigation process of Dicofol removal
AIP Conf. Proc. (December 2019)
Optimization of Rhodamine 6G removal from aqueous solution using Box-Behnken design
AIP Conf. Proc. (July 2021)