Utilization of wind energy has been investigated for a long period of time by different researchers in different ways. Out of which, the Horizontal Axis Wind Turbine and the Vertical Axis Wind Turbine have now advanced design, but still there is scope to improve their efficiency. The Vertical Axis Wind Turbine (VAWT) has the advantage over Horizontal Axis Wind Turbine (HAWT) for working on omnidirectional air flow without any extra control system. A modified H-rotor Darrieus type VAWT is analysed in this paper, which is a lift based wind turbine. The effect of solidity (i.e. chord length, no. of blades) on power coefficient (CP) of H-rotor for different tip speed ratios is numerically investigated. The study is conducted using time dependent RANS equations using SST k-ω model. SIMPLE scheme is used as pressure-velocity coupling and in all cases, the second order upwind discretization scheme is chosen for getting more accurate solution. In results, different parameters are compared, which depict the performance of the modified H-rotor Darrieus type VAWT. Double layered H-rotor having inner layer blades with longer chord gives higher power coefficient than those have inner layer blades with smaller chord.
Skip Nav Destination
,
,
Article navigation
12 July 2016
INTERNATIONAL CONFERENCE ON MECHANICAL ENGINEERING: Proceedings of the 11th International Conference on Mechanical Engineering (ICME 2015)
18–20 December 2015
Dhaka, Bangladesh
Research Article|
July 12 2016
The effect of solidity on the performance of H-rotor Darrieus turbine Available to Purchase
S. M. Rakibul Hassan;
S. M. Rakibul Hassan
a)
1Department of Mechanical Engineering,
Bangladesh University of Engineering and Technology
, Dhaka-1000, Bangladesh
Search for other works by this author on:
Mohammad Ali;
Mohammad Ali
b)
1Department of Mechanical Engineering,
Bangladesh University of Engineering and Technology
, Dhaka-1000, Bangladesh
Search for other works by this author on:
Md. Quamrul Islam
Md. Quamrul Islam
c)
1Department of Mechanical Engineering,
Bangladesh University of Engineering and Technology
, Dhaka-1000, Bangladesh
Search for other works by this author on:
S. M. Rakibul Hassan
1,a)
Mohammad Ali
1,b)
Md. Quamrul Islam
1,c)
1Department of Mechanical Engineering,
Bangladesh University of Engineering and Technology
, Dhaka-1000, Bangladesh
AIP Conf. Proc. 1754, 040012 (2016)
Citation
S. M. Rakibul Hassan, Mohammad Ali, Md. Quamrul Islam; The effect of solidity on the performance of H-rotor Darrieus turbine. AIP Conf. Proc. 12 July 2016; 1754 (1): 040012. https://doi.org/10.1063/1.4958372
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
The implementation of reflective assessment using Gibbs’ reflective cycle in assessing students’ writing skill
Lala Nurlatifah, Pupung Purnawarman, et al.
Classification data mining with Laplacian Smoothing on Naïve Bayes method
Ananda P. Noto, Dewi R. S. Saputro
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Related Content
Performance investigations of modified asymmetric blade H-Darrieus VAWT rotors
J. Renewable Sustainable Energy (June 2018)
Performance evaluation of H-type Darrieus VAWT with J-shaped blade geometry at variable pitch angles
AIP Conf. Proc. (July 2019)
Performance study of hybrid vertical axis wind turbine (VAWT) Savonius-Darrieus NREL S809 using computational fluid dynamics (CFD) method
AIP Conf. Proc. (October 2024)
Performance prediction of asymmetrical bladed H-Darrieus VAWT rotors in low wind speed condition using CFD
AIP Conf. Proc. (April 2018)
Influence of slat and flaps arrangement on the performance of modified Darrieus wind turbine
AIP Conf. Proc. (December 2019)