Potentiostat is principal devices in modern electrochemical research especially in the investigation of mechanism reaction which associated with the redox chemistry reaction and other chemical phenomena. Several applications measurement is developed based on this tool such as measurement of sample concentrations, quality test of food and medicine, environmental monitoring and biosensors or development of a protein sensor. We have developed a low cost, simple and portable potentiostat with a relatively small dimension. TLC2264 op-amp and ATMEGA32 microcontroller is used to build controller circuit system. Range potential measurement of this tool is between −1600mV and +1600mV within frequency range 1Hz - 1 kHz. The developed instrument has been tested for measuring samples using different voltammetry techniques, like cyclic, square wave, and linear sweep with relative error under 2.5%.
Skip Nav Destination
Article navigation
24 March 2014
4TH INTERNATIONAL CONFERENCE ON MATHEMATICS AND NATURAL SCIENCES (ICMNS 2012): Science for Health, Food and Sustainable Energy
8–9 November 2012
Bandung, Indonesia
Research Article|
March 24 2014
Development of a low cost potentiostat using ATXMEGA32
Abdul Muid;
Abdul Muid
Department of Physics, FMIPA Tanjungpura University, Jl. Ahmad Yani Pontianak, Kalimantan Barat,
Indonesia
Search for other works by this author on:
Rahadi Wirawan
Rahadi Wirawan
Department of Physics, Institut Teknologi Bandung, Jl. Ganesha 10, Bandung 40132, Indonesia and Department of Physics, FMIPA Mataram University, Jl. Majapahit 62 Mataram 83125,
Indonesia
Search for other works by this author on:
AIP Conf. Proc. 1589, 124–128 (2014)
Citation
Abdul Muid, Mitra Djamal, Rahadi Wirawan; Development of a low cost potentiostat using ATXMEGA32. AIP Conf. Proc. 24 March 2014; 1589 (1): 124–128. https://doi.org/10.1063/1.4868765
Download citation file:
Pay-Per-View Access
$40.00
Sign In
You could not be signed in. Please check your credentials and make sure you have an active account and try again.
Citing articles via
Inkjet- and flextrail-printing of silicon polymer-based inks for local passivating contacts
Zohreh Kiaee, Andreas Lösel, et al.
Design of a 100 MW solar power plant on wetland in Bangladesh
Apu Kowsar, Sumon Chandra Debnath, et al.
Effect of coupling agent type on the self-cleaning and anti-reflective behaviour of advance nanocoating for PV panels application
Taha Tareq Mohammed, Hadia Kadhim Judran, et al.
Related Content
A potentiostat featuring an integrator transimpedance amplifier for the measurement of very low currents—Proof-of-principle application in microfluidic separations and voltammetry
Rev. Sci. Instrum. (March 2016)
Application for temperature and humidity monitoring of data center environment
AIP Conference Proceedings (December 2015)
Improving working life of automobile water pump shaft by hard material
AIP Conf. Proc. (December 2019)
Electrochemical study of TiO2 thin film on aluminium electrode for glucose detection
AIP Conf. Proc. (January 2020)
Mangrove (Rhizophora mucronata) leaves extract as steel corrosion inhibitor
AIP Conference Proceedings (November 2021)